How-to
1975 Chevrolet Blazer Passenger Floorboard and Rocker Repair
The rusted passenger side floorboard and its support were cut out of a 1975 Chevrolet Blazer and rebuilt, with square tubing added behind the rocker for reinforcement. The repair continued up to the door hinge area, where a cover panel was fabricated from a donor door skin before the finished side was coated in bedliner.
-
Step 1
Cut out the rusted passenger side floorboard and its support. Prep the surrounding metal for repair.
-
Step 2
Reinforce the passenger side with square tubing run behind the rocker.
-
Step 3
Fit the new floorboard with the rocker attached to it.
-
Step 4
Remove the door hinges. Clean the hinge holes and paint the bare area.
-
Step 5
Make a template from flat cardboard, then cut a cover to that template. Mental-Elf made the prototype cover from the skin of a donor door.
-
Step 6
Install the prototype cover with rivets.
-
Step 7
Apply bedliner coating to the finished passenger side. Mental-Elf reports the only work remaining on that side is bolting the seats and belts back in.
-
Step 8
The photos end here, with the seats and belts not yet reinstalled.
Some product links go to the supplier the owner bought from. SuperMotors does not earn a commission today; if that changes, this line will say so and creators will be paid from it.