SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Home/ Ford/ Escape/ “Mini-Me”/ How-to

How-to

2006 Ford Escape Cargo Floor Sound Deadening and Hidden Storage

2006 Ford Escape · Upgrade · Moderate

Documented by SuperMotors from AK4wheeler’s photos

The owner of this 2006 Ford Escape stripped the cargo area to bare metal, worked out the factory sound deadening, laid new foil-backed damping sheets over the floor and side panels, and ended with a covered under-floor storage recess.

  1. Step 1

    The cargo area as it started: folded rear seats over plain carpet on the factory floor, which the owner says bunched up when loading.

    Step 1: The cargo area as it started: folded rear seats over plain carpet on the factory floor, which the owner says
  2. Step 2

    Pull the carpet and trim from the rear area to expose the bare sheet metal of the wheel well and quarter panel, leaving the wiring along the floor in place.

    Step 2: Pull the carpet and trim from the rear area to expose the bare sheet metal of the wheel well and quarter
  3. Step 3

    The factory sound deadening is still stuck to the bare floor pan; the owner calls the stock material poor and removes it to make room for better.

    Step 3: The factory sound deadening is still stuck to the bare floor pan; the owner calls the stock material poor and
  4. Step 4

    Work the old material loose with a hammer. The owner found this the hard part of the job.

    Step 4: Work the old material loose with a hammer. The owner found this the hard part of the job.
  5. Step 5

    With the floor pan stripped to bare metal, the real work of the new floor begins.

    Step 5: With the floor pan stripped to bare metal, the real work of the new floor begins.
  6. Step 6

    Stick foil-backed damping sheets over the wheel well and the side panel, cutting them around the wiring.

    Step 6: Stick foil-backed damping sheets over the wheel well and the side panel, cutting them around the wiring.
  7. Step 7

    Continue the damping sheets up the rear side panel and across the lower corner of the cargo area.

    Step 7: Continue the damping sheets up the rear side panel and across the lower corner of the cargo area.
  8. Step 8

    Lay the damping sheets across the whole cargo floor, covering the stamped ribs of the floor pan.

    Step 8: Lay the damping sheets across the whole cargo floor, covering the stamped ribs of the floor pan.
  9. Step 9

    With the floor rebuilt, an open recess under the cargo floor gives about one cubic foot of extra storage, which the owner suggests for tiedowns or a hidden amp.

    Step 9: With the floor rebuilt, an open recess under the cargo floor gives about one cubic foot of extra storage
  10. Step 10

    Close the lid over the recess: the finished cargo floor sits flat across the back of the Escape.

    Step 10: Close the lid over the recess: the finished cargo floor sits flat across the back of the Escape.

Some product links go to the supplier the owner bought from. SuperMotors does not earn a commission today; if that changes, this line will say so and creators will be paid from it.