SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Crown Victoria/ 1998–2011/ “The Vic”/ Steeda Install supermotors.net/registry/1912/9792

Album section

Steeda Install

From 2000 Ford Crown Victoria “The Vic”, documented by J. Barry.

16 photos
← Back to this vehicle
2000 Ford Crown Victoria - Engine bay of a V8 with the serpentine belt off, showing the crank pulley, alternator, water pump pulley and A/C compressor pulley bare. A… 2000 Ford Crown Victoria - Overhead view into an open engine bay showing the alternator, serpentine belt pulleys and accessory drive on the passenger side of a V8, wi… 2000 Ford Crown Victoria - V8 engine bay with the serpentine belt removed, exposing the crank pulley, alternator with handwritten marker numbers, water pump and idler… 2000 Ford Crown Victoria - Two idler/tensioner pulleys and their mounting nut laid side by side on a pink shop rag draped over the radiator support: at left a smooth-… 2000 Ford Crown Victoria - Two water pump pulleys sitting on a pink shop towel over the radiator support, mounting-face up: at left a larger flat four-bolt pulley, at… 2000 Ford Crown Victoria - Two water pump pulleys resting on a pink shop towel over the radiator support: at left a smooth-finish four-bolt pulley, at right the deep-… 2000 Ford Crown Victoria - Front of a V8 with a puller tool bolted to the crankshaft pulley to draw it off the snout, its center screw and legs threaded into the pull… 2000 Ford Crown Victoria - Belt-side comparison of two crankshaft pulleys on a pink shop towel over the radiator support: at left the stock three-spoke harmonic balan… 2000 Ford Crown Victoria - Two crankshaft pulleys laid on a pink shop towel over a fender during an engine-bay job: at left the large-diameter three-spoke stock harmo… 2000 Ford Crown Victoria - Front of a V8 engine with the serpentine belt removed, exposing the bare crank pulley, alternator pulley, idler and tensioner pulleys. The… 2000 Ford Crown Victoria - Close-up down into the front of an engine bay showing the crankshaft damper pulley, serpentine belt idler and tensioner pulleys, and the al… 2000 Ford Crown Victoria - Close view of a V8 accessory drive with the serpentine belt installed around the crank pulley, alternator, tensioner and idlers, the belt s… 2000 Ford Crown Victoria - Engine bay shot of a modular V8 looking down at the aluminum intake manifold, throttle body, and the alternator marked with handwritten num… 2000 Ford Crown Victoria - Overhead view down into the front of a V8 engine bay showing the serpentine belt routed around the crank pulley, alternator with a handwrit… 2000 Ford Crown Victoria - Open hood view of a modular V8 engine bay with a large black plastic intake manifold cover bearing a Ford oval, the corrugated air inlet tu… 2000 Ford Crown Victoria - Overhead view of a modular V8 engine bay with the black plastic intake manifold cover embossed '4.6' sitting between the cam covers. The al…