probe project 2008

Front view of a 1990 Ford Probe with its hood open, revealing the engine compartment. AI caption guess i'm kinda a red ford guy Owner A comparison of a used exhaust manifold next to a newly chromed one. AI caption A comparison of a rusty exhaust manifold and a newly polished one sits on a garage floor. AI caption A close-up view of a metal exhaust manifold part, showing its construction and bolt holes. AI caption Close-up of an exhaust manifold being held, with another part on the floor. AI caption Two exhaust manifolds, one old and rusty, the other polished and new, lie on a concrete surface. AI caption A comparison of old and new exhaust manifolds is shown on a workshop floor. AI caption Close-up view of an engine bay, a chrome intake manifold and distributor cap. AI caption Engine valve train components, including rocker arms and springs, are shown in detail. AI caption Close-up of a V6 engine bay chrome valve covers and intake manifold. AI caption Close-up view of a chrome 3.0 V6 engine cover and associated components. AI caption Close-up view of an engine bay a chrome valve cover with "3.0 VE" visible. AI caption Close-up of a 3.0 V6 engine, likely from a Ford vehicle, with chrome valve covers. AI caption VideoJust my car, no music. Still sounds like a monster. Owner VideoHere's the water pump close up, and general overall clearances with the manifolds. Owner Video2004 Ranger composite intake manifold installed, 60mm mustang TB modified to fit. Still have some work to do, the steam is a small coolant… Owner