SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Crown Victoria/ 1998-2011/ “SOLD”/ Go Rhino 5040 Push Bar (No-Fascia Cut) supermotors.net/registry/20838/74920

Album section

Go Rhino 5040 Push Bar (No-Fascia Cut)

From 2003 Ford Crown Victoria “SOLD”, documented by mRdot.

23 photos
← Back to this vehicle
2003 Ford Crown Victoria - bumper removed with bare 5038 brackets mounted to the bumper reinforcement .. apparently the shock absorbers were removed to install the pu… 2003 Ford Crown Victoria - LH side of the 5038 bracket. 2003 Ford Crown Victoria - Close-up of a black steel undercarriage/frame area showing bracket mounts with bolts and nuts, with a metal file resting against the frame.… 2003 Ford Crown Victoria - Close-up of a black steel frame section and a bolted-on bracket with two open mounting holes, with a knurled metal punch or drift tool bein… 2003 Ford Crown Victoria - Close-up under the front bumper of a silver vehicle, showing a metal support bracket with two bolts and a black plastic lower fascia; a knu… 2003 Ford Crown Victoria - A total of 5 bolts mount on each side mount the 5038 brackets to the bumper reinforcement. 2003 Ford Crown Victoria - Close-up of a vehicle's front bodywork removed or opened, showing the gray plastic grille/radiator support area with a green and black wiri… 2003 Ford Crown Victoria - cut made to install the 5038 push bar. 2003 Ford Crown Victoria - used a light bonding tape on the front and then used a strong adhesive to seal the hole off from the back, later i will fill in the front b… 2003 Ford Crown Victoria - A tube of PL Premium Polyurethane Construction Adhesive with a blue base and yellow/black label lies atop a roll of gray duct tape on a red… 2003 Ford Crown Victoria - 5038 brackets removed. ** the bumper reinforcement was bent on the top and bottom from the brackets. 2003 Ford Crown Victoria - this is the main bracket for the 5040, which mounts to the crossmember of 03 and above models only. 2003 Ford Crown Victoria - only two bolts mount the main bracket to the crossmember. 2003 Ford Crown Victoria - Close-up of a vehicle's front core support and radiator area with the front bumper cover removed, showing a metal crossmember, mounting hol… 2003 Ford Crown Victoria - main bracket mounted. (top view) 2003 Ford Crown Victoria - the top bracket will bolt into a bracket that slides under the top of the bumper and bottom of the header panel to mount the top part of th… 2003 Ford Crown Victoria - LH view of the top bracket, the bracket slides under the top of the bumper and bottom of the header panel, right now there is a lot of extr… 2003 Ford Crown Victoria - Close-up of a Ford front grille showing the blue oval Ford emblem set in a black honeycomb mesh grille, with a metal support panel below he… 2003 Ford Crown Victoria - Close-up of a hex-head bolt with a grade marking, secured through a flat washer against a black painted metal panel, with white and dark st… 2003 Ford Crown Victoria - Close-up of a black steel mounting bracket bolted to a white vehicle body with two hex-head bolts, showing weld beads and a curved black co… 2003 Ford Crown Victoria - Front view of a white Ford sedan fitted with a black tubular push-bumper grille guard, honeycomb grille and Ford oval. 2003 Ford Crown Victoria - Closeup of a white truck front bumper area showing a black brush guard tube bolted to the frame. 2003 Ford Crown Victoria - White Ford sedan with a black push/brush guard on the front bumper, parked on a residential street in autumn.