DSC00038.JPG
211 hits | 27.3 KB | Posted: 7/27/16
Silicone adhesive was not put in the correct place to hit the cross member in several places as can...

DSC00039.JPG
174 hits | 51.15 KB | Posted: 7/27/16

DSC00040.JPG
192 hits | 25.67 KB | Posted: 7/27/16

DSC00041.JPG
167 hits | 25.58 KB | Posted: 7/27/16

DSC00043.JPG
188 hits | 29.4 KB | Posted: 7/27/16
panel loose because of missing silicone

DSC00042.JPG
176 hits | 41.54 KB | Posted: 7/27/16


panel loose because of missing silicone

DSC00044.JPG
190 hits | 22.65 KB | Posted: 7/27/16

DSC00045.JPG
187 hits | 110.56 KB | Posted: 7/27/16
Geometry is wrong on pull cable transport could not unlatch hitch with out lifting handle manually

DSC00046.JPG
178 hits | 56.4 KB | Posted: 7/27/16

DSC00047.JPG
177 hits | 102.42 KB | Posted: 7/27/16
Cable dose not pull handle all the way to vertical position to unlatch this is as far as the cable w...

DSC00048.JPG
170 hits | 85.33 KB | Posted: 7/27/16
needs to be here to unlatch

DSC00049.JPG
204 hits | 76.82 KB | Posted: 7/27/16
Straps do not fit or support tanks

DSC00050.JPG
215 hits | 55.09 KB | Posted: 7/27/16
this is not supporting the tank and the edges seem to be stressing corners of the tank

DSC00051.JPG
207 hits | 73.21 KB | Posted: 7/27/16
bracket dose not let the screws tighten down the angle of the bracket is causing it to cut/wear in t...

DSC00052.JPG
197 hits | 77.4 KB | Posted: 7/27/16
the straps on the front grey water tank fit better but I think they should have rubber under them to...

DSC00054.JPG
192 hits | 63.7 KB | Posted: 7/27/16
not sure why this is bent around so you cannot get to bolts

DSC00055.JPG
186 hits | 50.65 KB | Posted: 7/27/16
Living quarters door Is not mounted square to frame causing it to hang up on one of the door screws ...

DSC00056.JPG
186 hits | 39.4 KB | Posted: 7/27/16

DSC00057.JPG
223 hits | 54.58 KB | Posted: 7/27/16

DSC00058.JPG
260 hits | 86.97 KB | Posted: 7/27/16
Seal on generator door was not properly installed, when the door was put on it could not sit properl...

DSC00059.JPG
221 hits | 47.99 KB | Posted: 7/27/16

DSC00060.JPG
226 hits | 48.27 KB | Posted: 7/27/16

DSC00061.JPG
208 hits | 58.72 KB | Posted: 7/27/16

DSC00062.JPG
219 hits | 62.63 KB | Posted: 7/27/16

DSC00063.JPG
243 hits | 32.49 KB | Posted: 7/27/16

DSC00064.JPG
245 hits | 34.69 KB | Posted: 7/27/16
One of nuts for the hinges on hay box is already backing off the bolt. They should be double nutted ...

DSC00065.JPG
267 hits | 69.57 KB | Posted: 7/27/16