SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Honda/ RANCHER/ 2006 RANCHER/ fs6 compressor supermotors.net/registry/21885/82479

Album section

fs6 compressor

From 2006 Honda RANCHER, documented by pfun41.

12 photos
← Back to this vehicle
2006 Honda RANCHER - FS 6 A/C compressor removed from a 1985 Ford Bronco. This compressor was removed during an engine swap because it was seized. The clutch, p… 2006 Honda RANCHER - 6 bolts are removed and the front cover is pried off. 2006 Honda RANCHER - A close-up view of a compressor part, showing its internal mechanism and a central shaft. 2006 Honda RANCHER - Valve plate removed. here you can see where the FS 6 name comes from. There are 3 double acting pistons moving within 6 bores. 2006 Honda RANCHER - Splitting the case halves. This split is why the bolt on manifold adapters are required for the hose connections. 2006 Honda RANCHER - Piston and swash plate assembly removed. 2006 Honda RANCHER - Close-up view of an FS6 compressor part, showing the crankshaft and piston components. 2006 Honda RANCHER - closeup of the piston and swash plate assembly with one piston removed. You can see the pads that ride on the swash plate. 2006 Honda RANCHER - This piston is the cause of failure for this compressor. Part of the pocked that the ball and pad rides in broke off, allowing it to come l… 2006 Honda RANCHER - Another view of the damage. Note the divot where the pad jammed into the piston after coming loose. 2006 Honda RANCHER - Rear cover removed. rear valve plate visible. 2006 Honda RANCHER - Rear cover and rear case half with valve plate removed.