SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Crown Victoria/ 1998-2011/ “EVIL VIC”/ 2012-12-16 - ADTR Ported Plenum & BBK 75mm TB supermotors.net/registry/24634/80810

Album section

2012-12-16 - ADTR Ported Plenum & BBK 75mm TB

From 2003 Ford Crown Victoria “EVIL VIC”, documented by dmcdfreak.

49 photos
← Back to this vehicle
2003 Ford Crown Victoria - Cast-aluminum intake elbow with bolt-on throttle body, braided -AN line and red and blue anodized fittings. 2003 Ford Crown Victoria - Cast intake elbow and throttle-body assembly with throttle linkage, braided hose and a red anodized fitting. 2003 Ford Crown Victoria - Throttle-body intake elbow on a table, vapor port up top, braided -AN line with red and blue fittings. 2003 Ford Crown Victoria - Lower view of the cast intake elbow showing mounting flange, throttle linkage and braided -AN hose. 2003 Ford Crown Victoria - Angled view of the aluminum intake elbow showing the throttle bore, cast ports, label and braided hose. 2003 Ford Crown Victoria - BBK Power-Plus throttle body, 75mm bore, casting D-245-13, with throttle linkage and braided -AN hose. 2003 Ford Crown Victoria - Macro of a BBK Power-Plus throttle body stamped 75mm and D-245-13 on the machined aluminum casting. 2003 Ford Crown Victoria - Detail of a cast-aluminum BBK Power-Plus throttle body engraved 75mm and part number D-245-13. 2003 Ford Crown Victoria - BBK-branded throttle body shows its open gold butterfly valve beside a braided line with blue-and-red anodized fittings. 2003 Ford Crown Victoria - Angled view of a throttle body bolted to an aluminum intake elbow with a braided hose and blue anodized end fitting. 2003 Ford Crown Victoria - cast-aluminum intake plenum assembly with attached throttle body, braided lines and anodized fittings rests on a white surface. 2003 Ford Crown Victoria - Side view of an aluminum intake manifold and throttle body assembly with a braided hose and cast part numbers. 2003 Ford Crown Victoria - Head-on view of a BBK throttle body showing its open gold butterfly plate and twin screw retainers. 2003 Ford Crown Victoria - Angled shot of a throttle body with open bore, linkage and a braided hose ending in blue and red anodized fittings. 2003 Ford Crown Victoria - aluminum intake manifold and throttle body assembly with a looping braided line and red-blue anodized fittings. 2003 Ford Crown Victoria - Cast-aluminum intake manifold and throttle body bearing a white label, with a braided hose and anodized fittings. 2003 Ford Crown Victoria - Macro view of a two-bolt flange port revealing a slotted shaft inside a machined aluminum casting. 2003 Ford Crown Victoria - Close-up of a machined port flange with cast part numbers on an aluminum intake casting. 2003 Ford Crown Victoria - Side of an aluminum intake manifold displaying cast markings RF3W7, 9A589 and AA with two machined flanges. 2003 Ford Crown Victoria - intake manifold with a Ford oval logo and throttle body linkage, fronted by a coiled braided line. 2003 Ford Crown Victoria - Aluminum intake manifold and throttle body assembly with linkage and a braided hose ending in red and blue fittings. 2003 Ford Crown Victoria - throttle body joined to a flanged aluminum intake adapter, with a braided hose curving below it. 2003 Ford Crown Victoria - Aluminum intake elbow showing a rectangular flange opening, throttle linkage and a braided hose with anodized fittings. 2003 Ford Crown Victoria - Angled view of a throttle body assembly with an open rectangular flange port and a braided hose with red fittings. 2003 Ford Crown Victoria - Macro view looking into the rectangular flange opening of a machined aluminum intake casting beside a red fitting. 2003 Ford Crown Victoria - Aluminum intake casting showing an open rectangular flange port, lower bosses and a braided hose with red fitting. 2003 Ford Crown Victoria - Aluminum intake manifold with an open rectangular flange port, cast bosses and a coiled braided line above it. 2003 Ford Crown Victoria - throttle body bolted to a flanged aluminum intake elbow, with a braided hose ending in red and blue fittings. 2003 Ford Crown Victoria - Throttle body joined to a flanged aluminum intake casting with gold linkage and a braided hose with red fittings. 2003 Ford Crown Victoria - throttle body with an open rectangular flange, adjustment screws and a braided hose ending in red-blue fittings. 2003 Ford Crown Victoria - Detail of a BBK Power-Plus throttle body casting engraved 75mm and D-245-13 with throttle linkage at left. 2003 Ford Crown Victoria - Macro of a BBK Power-Plus throttle body engraved 75mm and D-245-13, showing its bore and linkage. 2003 Ford Crown Victoria - Closeup of BBK Power-Plus aluminum throttle body stamped 75mm and D-245-3, with throttle linkage at left 2003 Ford Crown Victoria - Throttle body and intake casting joined by a steel-braided line with anodized AN end fittings on a dark surface 2003 Ford Crown Victoria - Front view into an aluminum throttle body bore with the throttle blade closed and a coil return spring visible 2003 Ford Crown Victoria - Aluminum throttle body bore with the blade cracked open, exposing the shaft, screws and gold return spring 2003 Ford Crown Victoria - Inside an aluminum throttle body showing the level throttle blade, shaft and four corner mounting screws 2003 Ford Crown Victoria - Brass throttle blade stamped BBK seated in an aluminum bore, held by two screws on the central shaft 2003 Ford Crown Victoria - View into a throttle body showing the BBK-marked blade and shaft centered in the polished aluminum bore 2003 Ford Crown Victoria - Closeup of the BBK throttle blade and shaft assembly seated inside the cast aluminum throttle body bore 2003 Ford Crown Victoria - BBK-stamped throttle blade in an aluminum bore, a hand steadying the throttle linkage to the side 2003 Ford Crown Victoria - Cast aluminum intake elbow joined to a throttle body, with a steel-braided hose and anodized AN ends 2003 Ford Crown Victoria - Square-flanged aluminum intake elbow showing the bore opening, a red AN fitting and a bent vacuum line 2003 Ford Crown Victoria - Cast aluminum intake and throttle body assembly with a steel-braided line and anodized fittings 2003 Ford Crown Victoria - Cast aluminum intake plenum and throttle body with braided line resting inside an opened shipping box 2003 Ford Crown Victoria - Intake casting and throttle body with gold-colored linkage packed in an opened blue-lined product box 2003 Ford Crown Victoria - Top view of a cast aluminum intake with runners, throttle body and a draped braided hose in a box 2003 Ford Crown Victoria - BBK 75mm throttle body joined to an aluminum intake casting, with braided line, inside a shipping box 2003 Ford Crown Victoria - Closeup of the BBK throttle body bore and intake casting with a steel-braided hose, packed in a box