SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”

Join

Home/ Registry/ Ford/ Crown Victoria/ 1998-2011/ “EVIL VIC”/ 2013-12-18 - TCE STAINLESS STEEL MM BRAKE LINES supermotors.net/registry/24634/82432

Album section

2013-12-18 - TCE STAINLESS STEEL MM BRAKE LINES

From 2003 Ford Crown Victoria “EVIL VIC”, documented by dmcdfreak.

44 photos

← Back to this vehicle

2003 Ford Crown Victoria - Underbody view of a rear suspension showing the coil spring, lower control arm, rubber bushings and a rusty vented brake rotor with caliper.

2003 Ford Crown Victoria - Close-up underbody shot of a cast metal component with a braided stainless brake line attached by a banjo bolt fitting.

2003 Ford Crown Victoria - Underbody close-up of a yellow-zinc bracket bolted to the frame holding a braided stainless brake line in place with a hex nut.

2003 Ford Crown Victoria - Underbody view of a rear suspension with the coil spring, lower control arm and a routed braided brake line near a yellow-zinc bracket.

2003 Ford Crown Victoria - Underbody shot of a rear suspension showing the coil spring, lower control arm, rusty brake rotor and a routed braided brake line.

2003 Ford Crown Victoria - Underbody close-up showing a rubber suspension bushing, a metal subframe, and a brake caliper fed by a braided stainless brake line.

2003 Ford Crown Victoria - underbody close-up of a brake caliper with a banjo bolt fitting and rubber boot, alongside a parking-brake cable.

2003 Ford Crown Victoria - brake caliper fitted with a braided stainless-steel brake line and gold banjo bolt, viewed from beneath the vehicle.

2003 Ford Crown Victoria - underbody shot showing a rear shock absorber, coil spring, control arm and a cross-drilled brake rotor on the hub.

2003 Ford Crown Victoria - underbody view of a cross-drilled, slotted brake rotor with caliper, exposed wheel hub and five lug studs.

2003 Ford Crown Victoria - close-up of a cast brake caliper clamped over a drilled-and-slotted rotor, with a brake pad and lug studs visible.

2003 Ford Crown Victoria - underbody view of a drilled rear brake rotor with caliper, shock absorber and sensor wiring on the suspension.

2003 Ford Crown Victoria - underbody view of an exposed wheel hub with lug studs, a brake caliper and rotor amid suspension components.

2003 Ford Crown Victoria - close-up of a freshly cast brake caliper with banjo bolts and brake pad, an Interstate Batteries box behind it.

2003 Ford Crown Victoria - dim underbody view of a brake caliper and line seen above an aluminum subframe brace stamped METCO.

2003 Ford Crown Victoria - close-up of a cast brake caliper showing bleeder screw and gold banjo bolts, mounted near a concrete block wall.

2003 Ford Crown Victoria - bright red painted brake caliper clamped over a cross-drilled and slotted brake rotor, viewed from underneath.

2003 Ford Crown Victoria - underbody view of front suspension showing a coil spring, sway bar and a red caliper on a drilled rotor.

2003 Ford Crown Victoria - red painted brake caliper with a braided stainless brake line beside a coil spring and exposed wheel hub.

2003 Ford Crown Victoria - braided stainless-steel brake line routed past a coil spring and proportioning fitting to a red brake caliper.

2003 Ford Crown Victoria - underbody close-up of a brake hard-line bracket and fitting joining a braided hose near the coil spring.

2003 Ford Crown Victoria - underbody view of a cross-drilled, slotted brake rotor with a red caliper gripping it beside the wheel hub.

2003 Ford Crown Victoria - angled underbody view of a slotted and drilled brake rotor with a red caliper and exposed lug studs.

2003 Ford Crown Victoria - Photo of a red-painted front brake caliper over a vented rotor with a stainless braided brake hose.

2003 Ford Crown Victoria - Photo of front suspension showing a coil spring, braided brake line and red brake caliper.

2003 Ford Crown Victoria - Photo of front suspension components including coil spring, control arm and braided brake line.

2003 Ford Crown Victoria - Photo of an automotive wiring harness with connectors laid out on cardboard motor-oil flats.

2003 Ford Crown Victoria - Photo of an automotive wiring harness and connectors arranged on cardboard motor-oil boxes.

2003 Ford Crown Victoria - Photo of metal brake/fuel lines with bracket fittings laid on cardboard boxes.

2003 Ford Crown Victoria - Photo of a vehicle underbody showing the steering rack, crossmember and engine oil pan.

2003 Ford Crown Victoria - Photo of the vehicle front from below showing radiator, oil cooler and steering rack.

2003 Ford Crown Victoria - Photo of a vehicle underbody showing steering rack and exhaust headers on a shop lift.

2003 Ford Crown Victoria - Photo of a vehicle underbody showing steering rack, headers and oil pan on a shop lift.

2003 Ford Crown Victoria - Photo of a vehicle underbody showing dual exhaust pipes, oil pan and crossover.

2003 Ford Crown Victoria - Photo of a vehicle underbody showing dual exhaust piping, oil pan and rear crossover.

2003 Ford Crown Victoria - Photo of a vehicle underbody showing a Moroso oil pan with headers and exhaust piping.

2003 Ford Crown Victoria - Photo of a vehicle underbody showing a Moroso oil pan, dual exhaust and catalytic converters.

2003 Ford Crown Victoria - Photo of a vehicle underbody showing a finned aluminum oil pan and exhaust piping.

2003 Ford Crown Victoria - Photo of a vehicle underbody showing a catalytic converter, finned oil pan and exhaust pipes.

2003 Ford Crown Victoria - Photo of a vehicle underbody showing exhaust pipes, catalytic converter and aluminum oil pan.

2003 Ford Crown Victoria - Photo of a vehicle rear underbody showing a Drake differential cover, mufflers and exhaust crossover.

2003 Ford Crown Victoria - Photo close-up of an aluminum Drake Muscle Cars rear differential cover with finned ribs.

2003 Ford Crown Victoria - Photo of a rear brake rotor, hub and shock absorber with coil spring on a shop lift.

2003 Ford Crown Victoria - Marauder stainless steel brake hose kit laid out with mounting brackets, banjo bolts, copper washers, and printed instructions.