SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Crown Victoria/ 1998-2011/ “EVIL VIC”/ 2014-05-17 - NEW PARTS FOR KENNE BELL KIT INSTALL supermotors.net/registry/24634/83179

Album section

2014-05-17 - NEW PARTS FOR KENNE BELL KIT INSTALL

From 2003 Ford Crown Victoria “EVIL VIC”, documented by dmcdfreak.

137 photos
← Back to this vehicle
2003 Ford Crown Victoria - polished aluminum heat exchanger lies on a cloth with two curved black hoses and a bag of mounting hardware. 2003 Ford Crown Victoria - aluminum cooler core sits on a cloth alongside two black rubber hoses and a sealed bag of fittings. 2003 Ford Crown Victoria - long polished aluminum heat exchanger lies on a tan cloth next to a black coolant hose and a bagged hardware kit. 2003 Ford Crown Victoria - Close angled view of a polished aluminum heat exchanger showing a welded end tank and barbed hose fitting. 2003 Ford Crown Victoria - Macro close-up of a polished aluminum heat exchanger corner showing fin core, weld beads and a small brass fitting. 2003 Ford Crown Victoria - aluminum heat exchanger displayed above two black rubber hoses and a clear bag of clamps and hardware. 2003 Ford Crown Victoria - polished aluminum heat exchanger sits at an angle on tan cloth next to a curved black hose and a bagged hardware kit. 2003 Ford Crown Victoria - aluminum heat exchanger with mounting tabs lies above two black coolant hoses and a sealed hardware bag. 2003 Ford Crown Victoria - Low-angle close-up of an aluminum heat exchanger showing its fin core, welded end tank and a protruding hose barb. 2003 Ford Crown Victoria - Close-up of an aluminum heat exchanger end tank with a brass drain fitting beside a bagged black hose. 2003 Ford Crown Victoria - aluminum heat exchanger with mounting tabs is laid above a curved black hose and a clear bag of clamps. 2003 Ford Crown Victoria - aluminum heat exchanger sits at an angle beside a black coolant hose and a bagged hardware kit on tan cloth. 2003 Ford Crown Victoria - aluminum heat exchanger shown at an angle with a small brass fitting, beside a black hose and clear parts bag. 2003 Ford Crown Victoria - aluminum heat exchanger with twin barbed fittings rests beside black hoses and a sealed bag of hardware. 2003 Ford Crown Victoria - aluminum heat exchanger with mounting tabs lies above a curved black hose and a clear bag of clamps and parts. 2003 Ford Crown Victoria - aluminum heat exchanger is displayed above a black coolant hose and a sealed bag of mounting hardware. 2003 Ford Crown Victoria - aluminum heat exchanger with a mounting tab lies above a black hose and a clear bag of clamps and hardware. 2003 Ford Crown Victoria - aluminum heat exchanger shown at an angle with a brass drain fitting, beside black hoses and a parts bag. 2003 Ford Crown Victoria - Close angled view of an aluminum heat exchanger end with a brass fitting and welds beside a curved black hose. 2003 Ford Crown Victoria - aluminum heat exchanger with twin barbed fittings lies above a black coolant hose and a sealed hardware bag. 2003 Ford Crown Victoria - aluminum heat exchanger with twin hose barbs is shown above a curved black hose and a clear bag of parts. 2003 Ford Crown Victoria - aluminum heat exchanger with twin barbed fittings sits at an angle beside a black hose and a sealed parts bag. 2003 Ford Crown Victoria - Low-angle close-up of an aluminum heat exchanger end tank showing welds and two protruding hose barbs. 2003 Ford Crown Victoria - Macro close-up of an aluminum heat exchanger corner showing the fin core, weld beads and a small brass drain. 2003 Ford Crown Victoria - aluminum heat exchanger with a hose barb lies above a curved black hose and a sealed bag of clamps and parts. 2003 Ford Crown Victoria - aluminum heat exchanger is displayed above a long black coolant hose and a sealed bag of mounting hardware. 2003 Ford Crown Victoria - aluminum heat exchanger with twin barbed fittings sits at an angle beside a black hose and a sealed parts bag. 2003 Ford Crown Victoria - Close-up of a polished aluminum heat exchanger's end tank with two hose barb fittings, with a black rubber hose resting on a tan sheet. 2003 Ford Crown Victoria - long polished aluminum heat exchanger lies flat beside a curved black rubber hose and a bag of clamps and hardware. 2003 Ford Crown Victoria - Angled view of a polished aluminum heat exchanger with an end-tank barb fitting, a black hose and bagged hardware in the background. 2003 Ford Crown Victoria - Lengthwise view of a polished aluminum heat exchanger with a corner barb fitting, a black hose and a bag of hardware nearby. 2003 Ford Crown Victoria - Macro view of the welded polished aluminum end cap and brazed core fins of a heat exchanger on a tan cloth. 2003 Ford Crown Victoria - polished aluminum heat exchanger sits beside a curved black rubber hose and a bag of clamps and fittings. 2003 Ford Crown Victoria - polished aluminum heat exchanger laid out with a black rubber hose and a bag of clamps and hardware on a tan sheet. 2003 Ford Crown Victoria - polished aluminum heat exchanger with a bubble-wrapped bag of hardware and a black rubber hose laid on a tan cloth. 2003 Ford Crown Victoria - bubble-wrapped parts bag with a printed label reading Mustang Cobra Dual Pass Heat Exchanger and a vendor phone number. 2003 Ford Crown Victoria - polished aluminum heat exchanger with a corner barb fitting, a black rubber hose and a bag of clamps on a tan sheet. 2003 Ford Crown Victoria - long polished aluminum heat exchanger laid flat with a black rubber hose and a bag of fittings and clamps. 2003 Ford Crown Victoria - Angled close-up of a brushed aluminum heat exchanger end tank showing two hose barb fittings and welded seams. 2003 Ford Crown Victoria - Close-up of an aluminum heat exchanger corner showing two hose barb fittings, welded seams and a mounting tab. 2003 Ford Crown Victoria - Macro view of an aluminum heat exchanger end tank with two barb fittings, welded seams and the brazed core fins. 2003 Ford Crown Victoria - Close-up of an aluminum heat exchanger corner showing a small brass fitting, welded seam and the brazed core fins. 2003 Ford Crown Victoria - polished aluminum heat exchanger laid flat with a bubble-wrapped bag of hardware and a coiled black hose. 2003 Ford Crown Victoria - Close-up of an aluminum heat exchanger end tank showing two angled hose barb fittings and heavy welded seams. 2003 Ford Crown Victoria - Close-up of an aluminum heat exchanger end tank with a vertical and an angled hose barb fitting and welded seams. 2003 Ford Crown Victoria - Close-up of an aluminum heat exchanger corner showing a small brass petcock-style fitting and welded seams. 2003 Ford Crown Victoria - Close-up of an aluminum heat exchanger end showing a small brass drain fitting, welded seams and brazed core fins. 2003 Ford Crown Victoria - aluminum heat exchanger end with a small brass fitting, a coiled black hose behind it and bubble wrap on a tan cloth. 2003 Ford Crown Victoria - polished aluminum heat exchanger lying flat with a long curved black hose draped above it and a bag of hardware. 2003 Ford Crown Victoria - polished aluminum heat exchanger laid flat with an end barb fitting, a curved black hose and a bag of hardware. 2003 Ford Crown Victoria - welded polished aluminum fluid reservoir tank with a red flush-mount filler cap and a bag of brass fittings beside it. 2003 Ford Crown Victoria - Angled view of a polished aluminum fluid reservoir tank with a red flush-mount filler cap and a bag of brass fittings. 2003 Ford Crown Victoria - polished aluminum fuel cell sits on a sheet, its red Moroso flip-up filler cap open and a bag of brass fittings alongside. 2003 Ford Crown Victoria - welded aluminum fuel cell with a red flip-up filler cap on its angled top, shown next to a bag of brass AN fittings. 2003 Ford Crown Victoria - fabricated aluminum fuel cell rests on cloth, its red billet flip-up cap visible and a Moroso logo embossed on the side. 2003 Ford Crown Victoria - Top angle of a welded aluminum fuel cell with a round red flip-up billet filler cap secured by six bolts. 2003 Ford Crown Victoria - Macro shot of a red anodized flip-up fuel cap with a brass center fitting and AUTOMOTIVE text embossed on the rubber surround. 2003 Ford Crown Victoria - Corner view of a welded aluminum fuel cell highlighting its seam welds, red flip-up cap and a threaded side bung. 2003 Ford Crown Victoria - End view of a polished aluminum fuel cell with its red flip-up cap up top and a brass fitting threaded into a side bung. 2003 Ford Crown Victoria - welded aluminum fuel cell with a red flip-up filler cap, threaded side bungs and a bag of brass fittings nearby. 2003 Ford Crown Victoria - fabricated aluminum fuel cell with red billet cap and a brass petcock fitting installed, shown beside bagged brass parts. 2003 Ford Crown Victoria - welded aluminum fuel cell bearing a Moroso logo, its red flip-up cap closed, with a bag of brass fittings alongside. 2003 Ford Crown Victoria - polished aluminum fuel cell with a red flip-up cap, Moroso side logo and brass petcock, next to a bag of small parts. 2003 Ford Crown Victoria - welded aluminum fuel cell with a stepped top, red flip-up filler cap and an embossed Moroso logo on the side. 2003 Ford Crown Victoria - Low-angle view of a welded aluminum fuel cell, its TIG seam welds and embossed Moroso logo prominent, red cap at the corner. 2003 Ford Crown Victoria - taller welded aluminum fuel cell stands with its red flip-up filler cap facing forward and a bag of brass fittings beside it. 2003 Ford Crown Victoria - polished aluminum fuel cell with red flip-up cap and brass drain petcock, shown alongside a bag of brass AN fittings. 2003 Ford Crown Victoria - welded aluminum fuel cell with red flip-up cap, a side bung and brass petcock, displayed beside bagged brass fittings. 2003 Ford Crown Victoria - polished aluminum fuel cell with red flip-up cap and faint Moroso logo, brass fittings installed and bagged spares nearby. 2003 Ford Crown Victoria - Angled top view of a welded aluminum fuel cell with a red flip-up billet cap and an embossed Moroso logo on the side. 2003 Ford Crown Victoria - Close top view of a welded aluminum fuel cell with a red billet flip-up cap and Moroso branding embossed on the side panel. 2003 Ford Crown Victoria - Underside view of a welded aluminum fuel cell with a recessed handle and threaded bungs, shown beside a bag of brass parts. 2003 Ford Crown Victoria - Rear view of a welded aluminum fuel cell with raised welded bungs, a recessed flush handle and visible seam welds. 2003 Ford Crown Victoria - Rear three-quarter view of a welded aluminum fuel cell with welded bungs and brass fittings, beside a bag of brass parts. 2003 Ford Crown Victoria - Rear view of a polished aluminum fuel cell with a flush recessed handle and welded bungs, next to bagged brass fittings. 2003 Ford Crown Victoria - Rear view of a welded aluminum fuel cell showing a recessed handle, brass corner fitting and welded bungs with bagged spares. 2003 Ford Crown Victoria - End view of a welded aluminum fuel cell with a raised welded bung and brass fitting, shown beside a bag of brass parts. 2003 Ford Crown Victoria - polished aluminum fuel cell sits on a white sheet, fitted with a red-and-black quick-fill cap and a bagged set of brass fittings nearby. 2003 Ford Crown Victoria - brushed aluminum fuel cell shows a red flip-top quick-fill cap and an embossed Moroso logo, with brass fittings in a plastic bag alongside. 2003 Ford Crown Victoria - aluminum fuel cell with a red Moroso quick-fill cap is photographed from above beside a bag of brass fittings. 2003 Ford Crown Victoria - close-up shows the red flip-lever quick-fill fuel cap, ringed by six stainless bolts and mounted to a brushed aluminum tank. 2003 Ford Crown Victoria - aluminum fuel cell with a red quick-fill cap and a brass valve bung rests near two bags of brass fittings on a white sheet. 2003 Ford Crown Victoria - aluminum fuel cell with a red quick-fill cap and threaded side bungs sits beside a bag of brass fittings. 2003 Ford Crown Victoria - Top view of a brushed aluminum fuel cell with welded threaded bungs, a brass petcock valve, and a blank label plate. 2003 Ford Crown Victoria - aluminum fuel cell shows a recessed carry handle, welded threaded bungs and a brass valve, with the red quick-fill cap visible at the base. 2003 Ford Crown Victoria - close-up of an aluminum fuel cell's welded top face shows a threaded bung, a brass petcock valve, and a recessed carry handle. 2003 Ford Crown Victoria - aluminum fuel cell lies on its side showing a brass valve, with a bag of brass fittings resting nearby. 2003 Ford Crown Victoria - brushed aluminum fuel cell rests on a sheet, showing welded threaded bungs, a recessed carry handle, and a brass valve fitting. 2003 Ford Crown Victoria - Two brass plumbing fittings, a 90-degree elbow and a threaded hose barb, sit inside a clear plastic bag. 2003 Ford Crown Victoria - close-up of a brass elbow and threaded hose-barb fitting in a clear bag, with a small red zip tie alongside. 2003 Ford Crown Victoria - open white shipping box holds plastic-wrapped black automotive components packed over a flyer and green bubble cushioning. 2003 Ford Crown Victoria - close-up inside a shipping box shows dark automotive parts wrapped in plastic, with a white labeled tag among them. 2003 Ford Crown Victoria - matched pair of black plastic engine valve covers, cast with 'TFS-FMOD-VC-L', lie upside down showing their ribbed interiors. 2003 Ford Crown Victoria - Two black plastic engine valve covers rest interior-side-up beside a small bag of mounting hardware. 2003 Ford Crown Victoria - open cardboard shipping box is filled with crumpled clear plastic packaging marked by blue draw ties. 2003 Ford Crown Victoria - clear plastic bag holds an assortment of black rubber bushings and zinc-plated bolts and mounting hardware. 2003 Ford Crown Victoria - clear plastic bag is filled with black bushings and an assortment of plated bolts and fasteners. 2003 Ford Crown Victoria - black plastic valve cover cast with 'TFS-FMOD-VC-L' is shown interior-side-up, with a polished metal clip across its center. 2003 Ford Crown Victoria - black plastic valve cover cast 'TFS-FMOD-VC-R' lies interior-side-up beside its mate, with a bag of hardware at the edge. 2003 Ford Crown Victoria - close-up of a black plastic valve cover interior shows the cross-hatched casting and embossed text 'TFS-FMOD-VC-L'. 2003 Ford Crown Victoria - pair of black plastic valve covers lie interior-side-up, one cast 'TFS-FMOD-VC-L' with a polished metal clip across it. 2003 Ford Crown Victoria - close-up of a black plastic valve cover interior shows cross-hatched casting, embossed 'TFS-FMOD-VC-L', and a polished metal clip. 2003 Ford Crown Victoria - Close-up of the inside of a black valve cover showing a crosshatch baffle and cast lettering reading TFS-FMOD-VC-R. 2003 Ford Crown Victoria - pair of black valve covers laid upside down on a tan cloth, their crosshatched baffled undersides facing the camera. 2003 Ford Crown Victoria - Two black valve covers arranged side by side on a cloth with their finned baffle undersides exposed, beside an open box. 2003 Ford Crown Victoria - Underside view of two black valve covers, one showing a machined metal oil-fill collar and crosshatched internal baffling. 2003 Ford Crown Victoria - Close-up of a pair of cast aluminum modular V8 valve covers finished in textured satin black, sitting upside down on a light countertop wit… 2003 Ford Crown Victoria - Close-up of the interior of a dark grey valve cover showing diamond-pattern baffling and faint cast lettering. 2003 Ford Crown Victoria - Angled close-up of two valve cover undersides with crosshatched baffle plates and machined aluminum mounting blocks. 2003 Ford Crown Victoria - Two valve covers lying upside down on a cloth, each showing diamond-pattern internal baffling and aluminum spacer blocks. 2003 Ford Crown Victoria - pair of black valve covers shown from beneath, cast with TFS-FMOD-VC-L and TFS-FMOD-VC-R identifiers in the baffle area. 2003 Ford Crown Victoria - Detail of two valve cover undersides showing diamond baffles and cast part text reading TFS-FMOD-VC-L and TFS-FMOD-VC-R. 2003 Ford Crown Victoria - Two dark valve covers placed upside down on a white surface, showing crosshatched baffling and aluminum mounting blocks. 2003 Ford Crown Victoria - End-on view of two black valve covers showing their deep rails, gasket flanges and finned interior surfaces. 2003 Ford Crown Victoria - Two black valve covers shown end-on on a cloth, revealing finned interior baffles and sealing flanges. 2003 Ford Crown Victoria - Top view of two black finned valve covers fitted with brushed aluminum plates engraved Trick Flow. 2003 Ford Crown Victoria - pair of black finned valve covers laid on cloth, each carrying a brushed aluminum plate engraved with the Trick Flow name. 2003 Ford Crown Victoria - Two black finned valve covers shown from the top, each fitted with a brushed aluminum Trick Flow nameplate and oil-fill hole. 2003 Ford Crown Victoria - pair of black finned valve covers on a tan cloth, each topped with a brushed aluminum plate engraved Trick Flow. 2003 Ford Crown Victoria - Two black finned valve covers displayed on cloth, each with a brushed aluminum Trick Flow nameplate near the oil-fill opening. 2003 Ford Crown Victoria - pair of black finned valve covers on a tan cloth, each fitted with a brushed aluminum plate engraved with Trick Flow. 2003 Ford Crown Victoria - Close-up of the lower ends of two black valve covers showing vertical fin ribbing and rounded end caps. 2003 Ford Crown Victoria - Detail of two black finned valve covers showing ribbed sides and partly visible brushed aluminum Trick Flow nameplates. 2003 Ford Crown Victoria - Close-up of the ends of two black valve covers showing rounded caps and brushed aluminum plates engraved Trick Flow. 2003 Ford Crown Victoria - Detail of two black valve cover ends with rounded caps and brushed aluminum nameplates engraved Trick Flow. 2003 Ford Crown Victoria - Tight close-up of one black valve cover's rounded end and brushed aluminum plate engraved with the Trick Flow script. 2003 Ford Crown Victoria - Tight close-up of a black valve cover's end cap and brushed aluminum plate engraved with the Trick Flow name beside an oil-fill hole. 2003 Ford Crown Victoria - Close-up of a black crinkle-finish valve cover with a polished aluminum insert engraved with the Trick Flow logo. 2003 Ford Crown Victoria - Two black engine valve covers with polished aluminum Trick Flow logo inserts laid on a tan cloth. 2003 Ford Crown Victoria - Two black finned engine valve covers with polished aluminum Trick Flow accent plates resting on a cloth surface. 2003 Ford Crown Victoria - black ribbed valve cover featuring an oil-fill opening and a polished Trick Flow logo plate, on a tan cloth. 2003 Ford Crown Victoria - black ribbed engine valve cover with an oil-fill grommet and polished aluminum Trick Flow accent plate. 2003 Ford Crown Victoria - Two black engine valve covers with polished Trick Flow logo plates arranged at an angle on a tan cloth. 2003 Ford Crown Victoria - pair of black finned valve covers with engraved polished Trick Flow inserts displayed on a tan cloth. 2003 Ford Crown Victoria - Top-down view of two black valve covers with polished aluminum Trick Flow accent plates on a tan cloth. 2003 Ford Crown Victoria - End-on view of two black finned valve covers with polished Trick Flow insert plates on a tan surface. 2003 Ford Crown Victoria - Underside view of two black valve covers showing internal baffles, gasket rails, and cast TFS markings.