IMG_0015.JPG
1223 hits | 49.53 KB | Posted: 8/12/05
This is all you need for a drain plug for the old AOD transmission pan. That and a drill and a frien...

IMG_0075.JPG
834 hits | 69.89 KB | Posted: 8/24/05
First drill a pilot hole then drill it out to 1/2" and de-burr the hole. Why did I decide to drill r...

IMG_0043.JPG
812 hits | 65.09 KB | Posted: 8/24/05
Not only was I copying the Ford Racing pan's bolt location, but where my finger is pointing is the o...

IMG_0077.JPG
769 hits | 62.72 KB | Posted: 8/24/05
Simply snug the nut to the inside of the pan, using an old drain bolt and the plastic washer on the ...

IMG_0081.JPG
842 hits | 63.7 KB | Posted: 8/24/05
I'd say we got weld penetration, wouldn't you ? Once I pulled out the old bolt I just ground the wel...

IMG_0085.JPG
1064 hits | 49.82 KB | Posted: 8/24/05
With the weld cleaned up this is as pretty as it needs to be inside the pan and leakproof to be sure...

IMG_0091.JPG
887 hits | 42.42 KB | Posted: 8/24/05
New drain plug and washer going in. I like to use the exact size and bolt as the oil pan, to keep th...

IMG_0106.JPG
1069 hits | 46.13 KB | Posted: 8/24/05
In place and dirty already, but ready to drain without soaking me and my floor next year !