How-to
1990 Lincoln Town Car AOD Transmission Pan Drain Plug Install
An AOD transmission pan with no drain plug gets one added by drilling the pan and welding a nut to the inside. Sixlitre's photos cover the hardware, the hole location, the weld, the cleanup and the finished plug installed in the pan.
-
Step 1
Gather the drain plug hardware for the AOD pan. Sixlitre notes that the job also needs a drill and a friend who can weld.
-
Step 2
Choose the location on the pan, drill a pilot hole, then drill it out to 1/2" and de-burr the hole. Sixlitre picked that spot to copy the Ford Racing pan's bolt location and because it is the only fairly deep well area where the drain bolt will not interfere with anything.
-
Step 3
Snug the nut against the inside of the pan using an old drain bolt, with the plastic washer on the other side. Sixlitre reports that the washer melts, and that without it the bolt welded itself to the pan.
-
Step 4
Weld the nut to the pan, then remove the old bolt. Grind the weld flat to the pan until smooth and shoot the area with paint to prevent rust.
-
Step 5
Fit the new drain plug and washer. Sixlitre uses the exact same size and bolt as the oil pan to keep the number of spares needed on hand to a minimum.
-
Step 6
The album's photos end with the plug installed in the pan; no draining or refill is shown.
Some product links go to the supplier the owner bought from. SuperMotors does not earn a commission today; if that changes, this line will say so and creators will be paid from it.