1991 Eagle Talon AWD Dyno Chart - AMS Dynorun.015, 348.6 HP / 346.9 lb-ft

This document is a scanned chassis dynamometer (dyno) results chart produced by AMS (phone 847.709.0530, fax 847.290.1451). The run is labeled "DYNORUN.015RO" and the chart header "DYNORUN.015" reports a maximum power of 348.6 SAE horsepower and maximum torque of 346.9 ft-lbs. The graph plots two curves against engine speed on the horizontal axis, ranging from about 3,000 to 7,500 RPM (labeled RPM x1000). The left vertical axis shows SAE Horsepower from 50 to 400, and the right vertical axis shows SAE Torque in ft-lbs from 125 to 375. The torque curve rises steeply from roughly 3,200 RPM, peaks near 4,500 RPM at approximately 347 ft-lbs, and gradually falls off toward 7,400 RPM. The horsepower curve climbs steadily, plateauing near its 348.6 hp peak in the roughly 5,500–6,500 RPM range before declining slightly at redline. A notation "RPM = 120.39" appears at the top right of the chart. The document does not identify the vehicle, engine, modifications, correction details, or test date; it was uploaded to a 1991 Eagle Talon gallery, but the sheet itself contains no vehicle identification.