BAREEE NO 200 CRIMP CLAMPS 6.12 These special clamps should be used to clamp the and tank into position - late model radiators only 6.4 On late model radiators, a screwdriver can be used to remove the nylon tank from the radiator core LOCKING ADJUSTING new: wmln mm:- um 6.14 Locking pliers can be used to bend the tabs back to position 1/ . .-. . if first adjusted so the jaws close to the correct 13/32-inch , V . 6.15 Use a rotating motion as you squeeze the locking ~ dimension - use a 13l32-inch drill bit to set and maintain the proper dimension closed over the end tank retaining tabs