In order to get to these wires, you need to cram your head down by the brake pedal and look up towards the fuse block. I believe I had to remove some of the tape around the wire harness to access the wires. You are looking for 2 black w/light blue stripe wires. One goes to the running board lights, the other to the interior lights. These wires originate from the same place, so they can be hooked to the same switch without problems. I cut and joined the pair, ran a lead to the switch, then back to the black w/light blue stripe wires that run into the vehicle. You need to run 2 switches if you would like to control the running board lights and interior lights seperately.

Owner caption June 2007 · Photo 21 of 22