Custom Receiver Bracket Blueprint - Dimensioned Fabrication Drawing (Jeep Liberty)

This document is a dimensioned CAD blueprint (uploaded as "RECEIVER-2.JPG") watermarked "SCHEKI DESIGNS." It shows a fabricated part, apparently a receiver-related bracket or plate assembly, in three views. The top view depicts a flat bar 10.0000 units long and 2.0000 units tall with 0.2500 thickness, a mounting hole located 1.5000 from the left edge, a 1.0000 dimension, and a 50° angle callout. The main view shows a larger panel 9.9284 wide with two 6.5000 vertical dimensions locating a horizontal tab or cross member (shown partly in dashed/hidden lines) midway along the height. A small isometric 3D view at the right illustrates the assembled part: an angled plate or blade with a small bracket containing a hole at one end. A drawing symbol block appears in the lower-left corner. The blueprint contains no text identifying a vehicle make, model, year, part number, material, or tolerances — only geometric dimensions. A reader can learn the overall dimensions and hole placement needed to fabricate this bracket/receiver component, presumably in inches given the decimal format, though units are not stated on the drawing.