20190202_163929.jpg
133 hits | 102.25 KB | Posted: 2019-05-10
I do not understand why Supermotors rotates the pictures. Three different ones and all turned like this one. Anyway. Two of a Hella 500ff bolted to the upper grille support....
(Posted in: Aesthetics)

20190506_200058.jpg
141 hits | 80.59 KB | Posted: 2019-05-10
Looks like they work fine to me. The headlights are 9007s from either JDMastar or Superbrightleds.com (can not remember). Halogen on the left and the cheapo LEDS on the right. Might be alright....
(Posted in: Aesthetics)

20190506_130850.jpg
123 hits | 52.21 KB | Posted: 2019-05-10
Nothing extravagant....
(Posted in: Aesthetics)

20190506_130841.jpg
133 hits | 34.56 KB | Posted: 2019-05-10
Let us find out if these cheap Chinese things will work in my driving lights or not....
(Posted in: Aesthetics)

20190422_204031.jpg
120 hits | 68.66 KB | Posted: 2019-04-23
Looks nasty. Good thing I do not need them....
(Posted in: 4.10s.......eventually)

20190422_203956.jpg
122 hits | 86.46 KB | Posted: 2019-04-23
Super Duty Dana 50...a bit rough. Not the deal of the century but not a ripoff either....
(Posted in: 4.10s.......eventually)

20190407_144340.jpg
116 hits | 78 KB | Posted: 2019-04-07
Shoe retention spring came off. Heard a rotational grinding noise that I thought was bearing noise and then no. Glad I pulled the drum off to make sure....
(Posted in: 4.10s.......eventually)

20190407_144334.jpg
109 hits | 95 KB | Posted: 2019-04-07
Heard a brake noise come from no where. After putting 20-25 miles on it with no issue....
(Posted in: 4.10s.......eventually)

20190407_164625.jpg
108 hits | 61.7 KB | Posted: 2019-04-07
Yep, it sticks out...too much. Oh well, just need to live with it for a few months till PMF sends my RSK and I get the SD-D50 rebuilt. Pictures of that later....
(Posted in: 4.10s.......eventually)

20190407_164607.jpg
118 hits | 88.35 KB | Posted: 2019-04-07
The result of a DRW rear end in an SRW truck. It looks much worse in person....
(Posted in: 4.10s.......eventually)

20190405_103848.jpg
138 hits | 69.7 KB | Posted: 2019-04-05
Looks like it is ever so slightly beefier. Might just be me?...
(Posted in: 4.10s.......eventually)

20190405_103250.jpg
128 hits | 68.62 KB | Posted: 2019-04-05
New yoke is here! Yukon 41038. Sterling short 1350. Looks nice....
(Posted in: 4.10s.......eventually)

20190404_113737.jpg
113 hits | 55.83 KB | Posted: 2019-04-04
There is a chance I might need to get a new pinion yoke. This one is for the "short" pinion design....
(Posted in: 4.10s.......eventually)

20190404_112600.jpg
133 hits | 74.46 KB | Posted: 2019-04-04
Since I needed a new diff cover anyway: later model 10.5 finned aluminum (08-10 Super Duties.) Dorman part 697-725. Being a Dorman it's not 100% flat but hopefully torquing it down will take care of that. Bolts are pn: 960112D: flanged 5/16-18, 1 1/4 length....
(Posted in: 4.10s.......eventually)

20190330_143201.jpg
100 hits | 89.08 KB | Posted: 2019-04-04
I find doing the brakes are supremely easier with the plates off the truck. ...
(Posted in: 4.10s.......eventually)

20190323_191502.jpg
104 hits | 63.71 KB | Posted: 2019-03-29
Aaaaand that is what Por15 looks like when you rush it. Eh, it is the backing plate so I am not that worried about it. I do like the flat finish though....
(Posted in: 4.10s.......eventually)