IMG-2243.JPG 89 hits | 69.3 KB | Posted: 2020-06-29 Stuck a 2x4 under the stock bump stops to put it at full compression and still clear the tires. Progressive Daystar bump stops will make up the difference. I will have to move up to hydraulic bump stops if they are too harsh. Haven't had a chance to send it yet.... (Posted in: Solo Stage 4 kit)
IMG-2242.JPG 79 hits | 58.44 KB | Posted: 2020-06-29 Disassembled the rear leafs. Used steel tubing to take up the space of the lower 9 leafs to measure full compression needed to weld in lower shock mounts.... (Posted in: Solo Stage 4 kit)
IMG_2231.JPG 89 hits | 65.58 KB | Posted: 2020-06-29 Used the Quicktrick alignment system. Only had to adjust and recheck the alignment a few dozen times. Ride height and camber seemed to change the first few times I tested it. Ended up with about 8 degrees of caster to make it steer correctly. Steering was very sketchy at 6 degrees.... (Posted in: Solo Stage 4 kit)
IMG_2162.JPG 80 hits | 79.63 KB | Posted: 2020-06-29 Engine cage cross bar had to be lined up before final welding of shock hoops.... (Posted in: Solo Stage 4 kit)
IMG_2161.JPG 74 hits | 66.07 KB | Posted: 2020-06-29 Radius arm, traction beam and knuckle mocked up. Ended up pointing the reservoirs towards the front of the truck.... (Posted in: Solo Stage 4 kit)
