SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1980–1986/ “DeciBolt (Loud and fast)”/ Saginaw swap supermotors.net/registry/1501/8834

Album section

Saginaw swap

From 1986 Ford Bronco “DeciBolt (Loud and fast)” — documented by Ryan McCormick.

13 photos
← Back to this vehicle
1986 Ford Bronco - Left: original pump. Center: Ford HD pump. Right: Saginaw pump. Notice the outputs, i use the center HD casing and installed an ARG saginaw… 1986 Ford Bronco - Saginaw bracket on the Left, found on vans. Or part # F4UZ3C511A for around $45-$50 at your local Dealer 1986 Ford Bronco - Rear view of both pumps. notice the Sag pump output is straight back, while the original pump goes to the framerail. 1986 Ford Bronco - Directions on Case / Pump replacement 1986 Ford Bronco - Top: stock Bronco hp hose. Bottom: stock van return line. I used the stock Bronco HP hose which is better routed by frame and engine. 1986 Ford Bronco - This is a shot of the back of MY pump. The output is rotatable to align with the hose direction. 1986 Ford Bronco - Van high pressure line enters steering box (steel line at right angle). Also visible: return line entering rear of pump reservoir. 1986 Ford Bronco - Here's how the stock van high pressure line sits around the steering box. Notice how ackward it is. 1986 Ford Bronco - Old pump removed, new pump ready to go in. They both bolt to the Heads and one bolt on the water pump. 1986 Ford Bronco - This is MY Sag pump. I used the Older can, the ARG super pump, and a rotatable output. I can use the stock high pressure hose. This is my o… 1986 Ford Bronco - Mounted on 5.0L Bronco, this one has the pully to drive a York onboard air. 1986 Ford Bronco - Another mount on a 1982 4.9L Bronco. This one has the HD case, notice how the high presure outlet was rotated and using the stock hose. Sto… 1986 Ford Bronco - Another mount on a 5.8L Bronco, with stock pully and canister