4x4-vacuum-line.jpg
10429 hits | 65.81 KB | Posted: 2/7/05

The red arrow indicates where the stock, rubber vacuum lines connect. The ends of mine were brittle...
yellow-hub-seal.jpg
7710 hits | 50.68 KB | Posted: 2/7/05

This is the yellow o-ring that seals the hub. Replacement is easy, it simply fits around the outsid...
Ford SuperDuty-Excursion loose ball joints.mp4
10960 hits | 1.89 MB | Posted: 9/26/05

2-part video that shows a loose lower ball joint installed and removed.

Part 1 of the video shows...
How to remove Dana 50 hub.mp4
7537 hits | 652.63 KB | Posted: 12/16/05

This video clip shows how to remove the hub from a Dana 50 frontend off of an Excursion. This also a...
3a-Remove Ball Joints-Remove Hub c-clip.mp4
6836 hits | 675.74 KB | Posted: 9/11/06

Removing the retaining/c-clip from the hub.
3b-Remove Ball Joints-Remove Hub.mp4
7137 hits | 990.82 KB | Posted: 9/11/06

Removing the hub from the dana 50 front axle.
4a-Remove axle c-clip.mp4
6402 hits | 1.54 MB | Posted: 9/11/06

Remove axle c-clip from dana 50 front axle.
4b-Remove washers.mp4
6195 hits | 655.33 KB | Posted: 9/11/06

Remove the 3 washers from the dana 50 front axle.
4c-Remove drag link.mp4
5826 hits | 5.3 MB | Posted: 9/11/06

Removing the drag link from the front end.
4d-Loosen bolts on lug nut backplate.mp4
6596 hits | 1.52 MB | Posted: 9/11/06

Loosen the bolts behind the lug lugs the dana 50 (this is the hub assembly, which includes your bear...
4e-Unbolt ESOF line.mp4
5453 hits | 2.33 MB | Posted: 9/11/06

Unbolt the electronic shift on-the-fly (ESOF) line.
4f-Unbolt ABS sensor.mp4
5756 hits | 1.81 MB | Posted: 9/11/06

Unbolt the anti-lock brake sensor (ABS).
4g-Tap & pry lug nut plate loose.mp4
6123 hits | 4.45 MB | Posted: 9/11/06

Tap and pry loose the lug plate.
5a-Remove knuckle:axle washer.mp4
5537 hits | 850.29 KB | Posted: 9/11/06

Remove the knuckle/axle washer. Note the grooves face in towards the differential.
5b-Disconnect ESOF Vacuum Line.mp4
5274 hits | 1.92 MB | Posted: 9/11/06

Disconnect the electronic shift on-the-fly (ESOF) vacuum line.
5c-Remove Axle shaft.mp4
6777 hits | 4.33 MB | Posted: 9/11/06

Pry loose and remove axle shaft.
5d-Remove Cotter Pin.mp4
5459 hits | 4.44 MB | Posted: 9/11/06

Remove cotter pin from the knuckle.
5e-Unbolt steering knuckle.mp4
5591 hits | 5.74 MB | Posted: 9/11/06

Unbolt the steering knuckle.
6a-Remove c-clip.mp4
5104 hits | 2.68 MB | Posted: 9/11/06

Remove the c-clip from the steering knuckle.
6b-Remove lower ball joint.mp4
6047 hits | 1.22 MB | Posted: 9/11/06

Remove the lower ball joint with a BFH.
6c-Remove upper ball joint.mp4
6697 hits | 3.49 MB | Posted: 9/11/06

Remove the upper ball joint with the proper ball joint removal tool and air tools!
7a-install upper ball joint.mp4
6240 hits | 2.29 MB | Posted: 9/11/06

Using the ball joint press and air tools, install the new ball joints. This process is fairly straig...
8b-Inner seal.mp4
6115 hits | 2.52 MB | Posted: 9/11/06

Remove and install the new inner axle seal. (Outer axle seal should be pressed in by a shop or deale...
9a-Reinstall Steering Knuckle.mp4
6049 hits | 7.6 MB | Posted: 9/11/06

Reinstall the steering knuckle.
9b-Reinstall Axle shaft.mp4
6765 hits | 3.34 MB | Posted: 9/11/06

Reinstall the axle shaft.
9c-Reinstall lug nut plate & hose:lines.mp4
5524 hits | 10.47 MB | Posted: 9/11/06

Reinstall lug plate, hoses, and lines.
9d-Reinstall hub assembly & seal.mp4
6233 hits | 8.03 MB | Posted: 9/11/06

Reinstall hub assembly and seal.
9e-Reinstall drag link.mp4
5502 hits | 3.65 MB | Posted: 9/11/06

Reinstall drag link.
9f-Reinstall brakes.mp4
5474 hits | 5.37 MB | Posted: 9/11/06

Reinstall brakes.

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog