P1250002.JPG
5309 hits | 70 KB | Posted: 1/25/07
I had a lot of play in the front passenger-side wheel and it was due to the bearing in the hub assem...

P1250004.JPG
4473 hits | 78.97 KB | Posted: 1/25/07
Brand new Dana 50 hub assembly. Front axle bearings in the Dana 50 are non-serviceable, so when the ...

P1250010.JPG
3917 hits | 73.47 KB | Posted: 1/25/07
Same hub assembly without the plastic plug.

P1250003.JPG
4004 hits | 80.47 KB | Posted: 1/25/07
The old hub assembly. Notice the 4 studs (threaded on each end). The studs feed through the holes in...

P1250009.JPG
3835 hits | 77.46 KB | Posted: 1/25/07

P1250005.JPG
4476 hits | 94.34 KB | Posted: 1/25/07
Notice the yellow o-ring (Part # F81Z-4A322-AA ) and how it is shredded. Do not expect to be able to...

P1250011.JPG
4848 hits | 72.68 KB | Posted: 1/25/07
Close-up of the front passenger knuckle with wheel, caliper, hub assembly, and brake dust shield rem...

P1250012.JPG
4651 hits | 70.85 KB | Posted: 1/25/07
The entire hub assembly swap will take 60-90 minutes and is very straight-forward.

[b]Remove the ...