01BumperOff.JPG
42 hits | 70.58 KB | Posted: 10/28/07
This is a JBG "kit" which comes with the receiver, 2 nut plates, 6 Gr.8 bolts/split washers/flat was...

02LFrameHorn.JPG
33 hits | 73.37 KB | Posted: 10/28/07
The 3 small threaded holes inboard are for the skidplate. I'll only be using the rearmost one.

02RFrameHorn.JPG
31 hits | 65.92 KB | Posted: 10/28/07
The 3 small threaded holes inboard are for the skidplate. I'll only be using the rearmost one.

03LFrameHorn.JPG
27 hits | 57.57 KB | Posted: 10/28/07
The receiver is hung loosely and pulled as far rearward as possible (so it can't shift later) before...

03RFrameHorn.JPG
43 hits | 58.08 KB | Posted: 10/28/07
The receiver is hung loosely and pulled as far rearward as possible (so it can't shift later) before...

04RFrameHorn.JPG
39 hits | 63.59 KB | Posted: 10/28/07

04LFrameHorn.JPG
55 hits | 50.14 KB | Posted: 10/28/07
The skidplate had to be trimmed around the other bolts.

05Installed.JPG
50 hits | 65.45 KB | Posted: 10/28/07

06LSide.JPG
49 hits | 57.24 KB | Posted: 10/28/07

07Done.JPG
51 hits | 68.31 KB | Posted: 10/28/07