1984 Ford Bronco axle pivot bushing tool pictures, videos, and sounds


Hits: 11631 Size: 62.98 KB Posted: 4/25/06 homemade tool to remove axle pivot bushings	Hits: 8426 Size: 63.51 KB Posted: 4/25/06 12" length of 1/2" all-thread, 2.5" I.D. x0.25" thick pipe collar, 1/2" thick metal plate, 13/16" im...	Hits: 9388 Size: 61.4 KB Posted: 4/25/06 Insert all-thread into bushing, place socket on side of bushing without metal lip (shown reversed in...	Hits: 8574 Size: 64.73 KB Posted: 4/25/06 place collar on other side, then plate and attach nuts&washers	Hits: 7822 Size: 61.57 KB Posted: 4/25/06 tighten nuts on both sides until they stop (100-120 ft.lbs.)
Hits: 8310 Size: 66.85 KB Posted: 4/25/06 give a sharp blow with hammer, re-tighten nuts if needed	Hits: 8602 Size: 67.05 KB Posted: 4/25/06 bushing will "pop" loose	Hits: 9398 Size: 68.54 KB Posted: 4/25/06 reverse tool to install new bushing using washer under socket, hammer used only to keep bushing stra...