pump_comparison.jpg
562 hits | 16.79 KB | Posted: 6/29/03
Left: original pump. Center: Ford HD pump. Right: Saginaw pump. Notice the outputs, i use the cen...

saginaw_brackets.jpg
461 hits | 26.03 KB | Posted: 6/29/03
Saginaw bracket on the Left, found on vans. Or part # F4UZ3C511A for around $45-$50 at your local D...

saginaw_brackets_2.jpg
492 hits | 43.75 KB | Posted: 6/29/03
Rear view of both pumps. notice the Sag pump output is straight back, while the original pump goes ...

Saginaw_can_closeup.jpg
405 hits | 45.61 KB | Posted: 6/29/03
Directions on Case / Pump replacement

saginaw_hose_3.jpg
340 hits | 40.78 KB | Posted: 6/29/03
Top: stock Bronco hp hose. Bottom: stock van return line. I used the stock Bronco HP hose which is...

sag_pump_02.jpg
352 hits | 17.89 KB | Posted: 6/29/03
This is a shot of the back of MY pump. The output is rotatable to align with the hose direction.

saginaw_hose_1.jpg
339 hits | 39.22 KB | Posted: 6/29/03
Van high pressure line enters steering box (steel line at right angle). Also visible: return line en...

saginaw_hose_2.jpg
359 hits | 39.46 KB | Posted: 6/29/03
Here's how the stock van high pressure line sits around the steering box. Notice how ackward it is.

saginaw_nobracket.jpg
283 hits | 34.21 KB | Posted: 6/29/03
Old pump removed, new pump ready to go in. They both bolt to the Heads and one bolt on the water pu...

sag_pump_01.jpg
407 hits | 53.3 KB | Posted: 6/29/03
This is MY Sag pump. I used the Older can, the ARG super pump, and a rotatable output. I can use t...

saginaw_bracket.jpg
349 hits | 36.2 KB | Posted: 6/29/03
Mounted on 5.0L Bronco, this one has the pully to drive a York onboard air.

saginaw_hose_4.jpg
363 hits | 70.61 KB | Posted: 6/29/03
Another mount on a 1982 4.9L Bronco. This one has the HD case, notice how the high presure outlet w...

saginaw_bracket_2.jpg
414 hits | 53.84 KB | Posted: 6/29/03
Another mount on a 5.8L Bronco, with stock pully and canister