01DashBlock.JPG
585 hits | 77.72 KB | Posted: 7/15/06
This style of fuse block was used in the dash of almost all Ford products until 1999.

02Tab.JPG
439 hits | 86.93 KB | Posted: 7/15/06
Pry the locking tab back carefully while pulling the corresponding wire firmly to release the termin...

03FlasherTerm.JPG
381 hits | 78.91 KB | Posted: 7/15/06
All dash fuse terminals are identical, but the flasher terminals have no side tabs.

05BusBars.JPG
356 hits | 97.65 KB | Posted: 7/15/06
The bus bar configuration varied by vehicle year & model. Not all have a wire attached.

11EngBlock.JPG
560 hits | 101.64 KB | Posted: 7/15/06
Typical engine-bay fuse block used on '92-04 trucks, and MANY other Ford products of that era.

12RedSmFuses.JPG
353 hits | 92.17 KB | Posted: 7/15/06
Releasing the lock shield for standard blade fuse positions.

13RedSmFuses.JPG
347 hits | 81.25 KB | Posted: 7/15/06
Lock shield for standard blade fuse positions.

14RedLgFuses.JPG
363 hits | 108.77 KB | Posted: 7/15/06
Releasing the lock shield for maxi-fuse positions.

15RedLgFuses.JPG
337 hits | 97.57 KB | Posted: 7/15/06
Lock shield for maxi-fuse positions.

16Ready.JPG
299 hits | 94.64 KB | Posted: 7/15/06
With all of the lock shields removed, any of the terminals can be released.

17PickSmFuses.JPG
310 hits | 91.69 KB | Posted: 7/15/06
The standard blade lock tabs are outboard of the fuse terminals.

18PickLgFuses.JPG
325 hits | 75.07 KB | Posted: 7/15/06
The maxi-fuse lock tabs are inboard of the fuse terminals, and are VERY easy to break by bending too...

19Terms.JPG
312 hits | 93.91 KB | Posted: 7/15/06
The standard blade fuses and relays use the same terminals; the maxi fuses use a much larger termina...

20BusCover.JPG
352 hits | 101.18 KB | Posted: 7/15/06
Remove the 2 phillips screws that hold the bus bar cover on.

21BusBar.JPG
343 hits | 100.98 KB | Posted: 7/15/06
The bus bar is visible with its cover removed.

22BusPry.JPG
373 hits | 70.8 KB | Posted: 7/15/06
Pry the bus bar up evenly along its entire length.

23BusOut.JPG
367 hits | 70.46 KB | Posted: 7/15/06
The bus bar must be lifted evenly so all the tabs come out of their slots at the same time.

24BusTerms.JPG
371 hits | 87.21 KB | Posted: 7/15/06
The bus bar terminals will fall out if the block is held upright & level while their lock tabs are p...

25Wires.JPG
350 hits | 38.99 KB | Posted: 7/15/06
A varied collection of spare terminals allows the new circuit to be color- & size-matched to the new...

Fuses92F.JPG
578 hits | 53.36 KB | Posted: 3/1/07
92 F-series Fuses