DCAM0153.JPG 567 hits | 66.18 KB | Posted: 10/5/05 Sorry I lost all of my pics of the build for the amp/cap rack but it is about the same idea....
DCAM0156.JPG 553 hits | 66.02 KB | Posted: 10/5/05 After all that is done you pull over and glue down your covering and install and let it pound.......Don't forget to break in your sub first or you will not get the best preformance...
DCAM0150.JPG 732 hits | 58.7 KB | Posted: 10/5/05 After you added about 3-4 coats of resin and even some fiberglass mat/cloth.....you always have to check the fit because sometimes during fiberglassing your project will shrink..........I painted it white just to seal the resin abit......
DCAM0146.JPG 542 hits | 52.61 KB | Posted: 10/5/05 Than you pull over your material and staple or hot glue it to the frame and start adding your fiberglass resin.........
DCAM0144.JPG 532 hits | 65.76 KB | Posted: 10/5/05 After all that is where you want it you build a frame for you to make the pannel to dress everything up.........
DCAM0143.JPG 514 hits | 62.44 KB | Posted: 10/5/05 This is what it looks like mounted in the trunk.
DCAM0142.JPG 509 hits | 59.9 KB | Posted: 10/5/05 Just a flat piece of MDF on the back of the sub box......well glued so it does not vibrate....
DCAM0141.JPG 534 hits | 59.12 KB | Posted: 10/5/05 Than I made the amp rack..and mounted it..
PICT0014.JPG 738 hits | 91.42 KB | Posted: 7/17/05 What a Bronco shell can be used for when it is off the BKO.
DCAM0150.JPG 732 hits | 58.7 KB | Posted: 10/5/05 After you added about 3-4 coats of resin and even some fiberglass mat/cloth.....you always have to check the fit because sometimes during fiberglassing your project will shrink..........I painted it white just to seal the resin abit......
Middle seat.JPG 655 hits | 76.01 KB | Posted: 7/26/05 Just a better shot of it. I am planning on changing it abit. I want the "seat" part to flip up to store things under it, and I want the back to fold forward and have a little compartment in it and cup holders. But for now it does the job I wanted ...
bott mount shock.JPG 633 hits | 104.46 KB | Posted: 7/30/05 Bottom shock mount waiting for the new one.
DCAM0153.JPG 567 hits | 66.18 KB | Posted: 10/5/05 Sorry I lost all of my pics of the build for the amp/cap rack but it is about the same idea....
DCAM0156.JPG 553 hits | 66.02 KB | Posted: 10/5/05 After all that is done you pull over and glue down your covering and install and let it pound.......Don't forget to break in your sub first or you will not get the best preformance...
Middle seat 2.JPG 546 hits | 73.42 KB | Posted: 7/26/05 This is the middle seat I put in for one extra person. Really nice if you really don't want a bench, but you want seating for 6.
DCAM0146.JPG 542 hits | 52.61 KB | Posted: 10/5/05 Than you pull over your material and staple or hot glue it to the frame and start adding your fiberglass resin.........
