SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1980–1986/ “Casual Mudder”/ SecretShakerProject supermotors.net/registry/1133/7822

Album section

SecretShakerProject

From 1984 Ford Bronco “Casual Mudder” — documented by Randy Zrubek.

17 photos
← Back to this vehicle
1984 Ford Bronco - shaker assembly purchased from Rare SPares, Australia 1984 Ford Bronco - front view of engine. You can see the off-set from center, and the bottom lip of the cowl at the rear that's in the way of the shaker base 1984 Ford Bronco - driver's-side view of engine. The carb is set way back under the cowl, angled back, and 2" off-center 1984 Ford Bronco - Shaker base mounted to OEM Holley carb. Had to cut about 2" off rear edge of top ring to clear firewall 1984 Ford Bronco - The problem mounting the scoop to the base! I plan to mount the scoop to a flat top plate that bolts to a modified midplate. I can adjust f… 1984 Ford Bronco - early design of airbox, using radiator shroud cut up into sections 1984 Ford Bronco - early design of airbox with diagram 1984 Ford Bronco - airbox design - scrapped due to large size 1984 Ford Bronco - another early design using the airfilter box from my 88 EFI Bronco. 1984 Ford Bronco - Modified midplate. For now, I'll call it an "adapter". This is just a crude design to get the proper alignment of the scoop. 1984 Ford Bronco - Scoop mounted to top plate, mounted to adapter 1984 Ford Bronco - modified mid-plate, front-support bracket. 1984 Ford Bronco - scoop and top plate mounted to flat metal pan that is bolted to the air box, with a cutout for airflow 1984 Ford Bronco - Front-support bracket is bolted to accessory/AC bracket at front of engine 1984 Ford Bronco - shaker hood, top view, Ford medium blue metallic, center is Ford indigo blue metallic, both are urethane-based. Trim ring is also glued aro… 1984 Ford Bronco - shaker hood, underside view, braces were cut back 2" from opening for fitment of rubber seal on shaker scoop. 1984 Ford Bronco - hood closed, scoop installed. Project finished!