IMG00081.jpg 858 hits | 32.89 KB | Posted: 10/9/08 So I did the unthinkable and made a little access panel to get to the passenger roller with my dremel and a drill.
IMG00080.jpg 853 hits | 46.53 KB | Posted: 10/9/08 As you can see the passenger is not even visible because of the non removable cross beam support.
IMG00079.jpg 877 hits | 38.71 KB | Posted: 10/9/08 As you can see the passenger side is a complete pain in the ass to get to.
IMG00075.jpg 1000 hits | 51.7 KB | Posted: 10/9/08 Before you start remove the driver side beam by removing the small phillips screw. Makes it easier to get things.
IMG00078.jpg 984 hits | 50.04 KB | Posted: 10/9/08 The window track removed from the window and the new roller put into its track. Not necessary to remove the track but just did to show that it fits without a problem.
IMG00076.jpg 898 hits | 38.9 KB | Posted: 10/9/08 Successfully removing the top of the old roller in order to drill it out.
IMG00074.jpg 917 hits | 58.86 KB | Posted: 10/9/08 I used a Dremel since I dont own a cutoff tool. So this and a drill to drill out the rivets.
IMG00073.jpg 625 hits | 52.28 KB | Posted: 10/9/08 The difficulty of the passenger side is there is no way to remove the cross beam.
IMG00082.jpg 964 hits | 54.11 KB | Posted: 10/9/08 This is the part purchased from Shucks Auto Supply. 74402 Dorman Universal Window Roller.
IMG00075.jpg 1000 hits | 51.7 KB | Posted: 10/9/08 Before you start remove the driver side beam by removing the small phillips screw. Makes it easier to get things.
IMG00078.jpg 984 hits | 50.04 KB | Posted: 10/9/08 The window track removed from the window and the new roller put into its track. Not necessary to remove the track but just did to show that it fits without a problem.
IMG00082.jpg 964 hits | 54.11 KB | Posted: 10/9/08 This is the part purchased from Shucks Auto Supply. 74402 Dorman Universal Window Roller.
IMG00074.jpg 917 hits | 58.86 KB | Posted: 10/9/08 I used a Dremel since I dont own a cutoff tool. So this and a drill to drill out the rivets.
IMG00076.jpg 898 hits | 38.9 KB | Posted: 10/9/08 Successfully removing the top of the old roller in order to drill it out.
IMG00079.jpg 877 hits | 38.71 KB | Posted: 10/9/08 As you can see the passenger side is a complete pain in the ass to get to.
IMG00081.jpg 858 hits | 32.89 KB | Posted: 10/9/08 So I did the unthinkable and made a little access panel to get to the passenger roller with my dremel and a drill.
IMG00080.jpg 853 hits | 46.53 KB | Posted: 10/9/08 As you can see the passenger is not even visible because of the non removable cross beam support.
