Steve83 > 1983 Ford Bronco > open folder Bronco Cargo Cover Specs & Cargo Net

Cargo Cover & Tailgate Net 1. Cargo Cover is 5 lbs 61x3x2" 2. Tailgate Net is 56"W x 13&...
Hits: 2735
Size: 39.91 KB
Posted: 4/25/07
Cargo Cover & Tailgate Net 1. Cargo Cover is 5 lbs 61x3x2" 2. Tailgate Net is 56"W x 13&...		The Bronco Cargo Net (F4TZ9855066A) is a reinforced 2-layer pocket ~56x13", and is probably rar...
Hits: 2483
Size: 104.31 KB
Posted: 5/17/09
The Bronco Cargo Net (F4TZ9855066A) is a reinforced 2-layer pocket ~56x13", and is probably rar...		'94-96 Bronco Cargo Net dimensions ~56x13" [url=http://www.supermotors.net/registry/media/7313...
Hits: 909
Size: 95.89 KB
Posted: 8/7/16
'94-96 Bronco Cargo Net dimensions ~56x13" [url=http://www.supermotors.net/registry/media/7313...		'94-96 Bronco Cargo Cover IF THE IMAGE IS TOO SMALL, click it. Actual dimensions: 5 lbs 61x3x2"...
Hits: 2490
Size: 27.52 KB
Posted: 4/25/07
'94-96 Bronco Cargo Cover IF THE IMAGE IS TOO SMALL, click it. Actual dimensions: 5 lbs 61x3x2"...		This cover was mangled & then abandoned in a junkyard for at least a year. It's severly sunburned, ...
Hits: 1881
Size: 74.51 KB
Posted: 4/25/07
This cover was mangled & then abandoned in a junkyard for at least a year. It's severly sunburned, ...
The best place to start disassembly is by removing the colored end caps from the black torque plates...
Hits: 1653
Size: 69.76 KB
Posted: 4/25/07
The best place to start disassembly is by removing the colored end caps from the black torque plates...		There are 4 short pins that lock into holes in the torqe plate, so it takes some effort to pop them ...
Hits: 1645
Size: 73.53 KB
Posted: 4/25/07
There are 4 short pins that lock into holes in the torqe plate, so it takes some effort to pop them ...		If the slots are aligned inside, the cap slides straight off.
Hits: 1596
Size: 71.48 KB
Posted: 4/25/07
If the slots are aligned inside, the cap slides straight off.		Here, the slot, pins, & mating holes are visible.
Hits: 1684
Size: 74.08 KB
Posted: 4/25/07
Here, the slot, pins, & mating holes are visible.		With both end caps off, the cover can be unwrapped. Align the torque plate slot with the drum slot ...
Hits: 1688
Size: 63.53 KB
Posted: 4/25/07
With both end caps off, the cover can be unwrapped. Align the torque plate slot with the drum slot ...
The plastic might be adhered to the drum, so it may be necessary to flex it to break it loose.
Hits: 1546
Size: 64.81 KB
Posted: 4/25/07
The plastic might be adhered to the drum, so it may be necessary to flex it to break it loose.		The date is printed on both sides of a Tyvek tag near the R end of the cover, at the seam on the dru...
Hits: 1475
Size: 35.68 KB
Posted: 4/25/07
The date is printed on both sides of a Tyvek tag near the R end of the cover, at the seam on the dru...		After the cover is stripped, wash it & put in on a flat surface in the sun to relax mild wrinkles. ...
Hits: 1610
Size: 29.63 KB
Posted: 4/25/07
After the cover is stripped, wash it & put in on a flat surface in the sun to relax mild wrinkles. ...		After driving out the LEFT roll pin (use a 3/32" drift), the torque plate, bearing, spring, and...
Hits: 1429
Size: 26.92 KB
Posted: 4/25/07
After driving out the LEFT roll pin (use a 3/32" drift), the torque plate, bearing, spring, and...		After MARKING the parts for proper reassembly later, pull the torque rod out of the drum & remove th...
Hits: 1419
Size: 19.94 KB
Posted: 4/25/07
After MARKING the parts for proper reassembly later, pull the torque rod out of the drum & remove th...
The torque spring is riveted to the rod - don't remove it. The rattle-mesh slides off easily.
Hits: 1485
Size: 43.95 KB
Posted: 4/25/07
The torque spring is riveted to the rod - don't remove it. The rattle-mesh slides off easily.		The bearing pops loose from the spring, but be sure to replace it in this direction.
Hits: 1341
Size: 33.89 KB
Posted: 4/25/07
The bearing pops loose from the spring, but be sure to replace it in this direction.		There's a black plastic rattle sleeve under the spring that should be captive (NOT removable) under ...
Hits: 1373
Size: 32.18 KB
Posted: 4/25/07
There's a black plastic rattle sleeve under the spring that should be captive (NOT removable) under ...		The large black bearings support the weight of the cover, and should slide freely inside the drum up...
Hits: 1352
Size: 48.3 KB
Posted: 4/25/07
The large black bearings support the weight of the cover, and should slide freely inside the drum up...		The bearings at the L end inside the drum is usually jammed onto its stops due to the spring pressur...
Hits: 1399
Size: 34.57 KB
Posted: 4/25/07
The bearings at the L end inside the drum is usually jammed onto its stops due to the spring pressur...
Cross-section of the drum tube. There are 6 tabs punched in to locate the white torque rod bearings...
Hits: 1475
Size: 36.9 KB
Posted: 4/25/07
Cross-section of the drum tube. There are 6 tabs punched in to locate the white torque rod bearings...		Remove the 2 phillips screws from below the handle.
Hits: 1457
Size: 77.62 KB
Posted: 4/25/07
Remove the 2 phillips screws from below the handle.		Remove the handle & work the draw rod to free it from the plastic so it slides.
Hits: 1454
Size: 77.33 KB
Posted: 4/25/07
Remove the handle & work the draw rod to free it from the plastic so it slides.		Slide the draw rod far enough to expose one rivet, and turn it to the flared end. Use a small file ...
Hits: 1507
Size: 79.5 KB
Posted: 4/25/07
Slide the draw rod far enough to expose one rivet, and turn it to the flared end. Use a small file ...		Work the catch pin out without tearing the O-rings, and slide the draw rod out of the cover. Then r...
Hits: 1589
Size: 86.75 KB
Posted: 4/25/07
Work the catch pin out without tearing the O-rings, and slide the draw rod out of the cover. Then r...
Use silicone grease on the O-rings, and teflon (PTFE) grease on the bearings.
Hits: 1978
Size: 75.94 KB
Posted: 4/25/07
Use silicone grease on the O-rings, and teflon (PTFE) grease on the bearings.		It's possible to remove the roll pins with the end caps in place, but it's much more difficult.
Hits: 1401
Size: 38.96 KB
Posted: 4/25/07
It's possible to remove the roll pins with the end caps in place, but it's much more difficult.		By slightly crushing the drum, rotating a few degrees, & repeating, most dents can be pushed back ou...
Hits: 1452
Size: 86.92 KB
Posted: 4/25/07
By slightly crushing the drum, rotating a few degrees, & repeating, most dents can be pushed back ou...		This drum is severely bent in several places, as are its torque rod & draw rod.
Hits: 1439
Size: 42.77 KB
Posted: 4/25/07
This drum is severely bent in several places, as are its torque rod & draw rod.		After some work, the drum is much better, but still not good enough to be used. The draw rod & torq...
Hits: 1398
Size: 62.44 KB
Posted: 4/25/07
After some work, the drum is much better, but still not good enough to be used. The draw rod & torq...
The roller assembly is ready to have the colored parts added, beginning with the cover. Slide it in...
Hits: 1433
Size: 64.27 KB
Posted: 4/25/07
The roller assembly is ready to have the colored parts added, beginning with the cover. Slide it in...		Left end, assembled
Hits: 1547
Size: 80.73 KB
Posted: 4/25/07
Left end, assembled		Middle, assembled
Hits: 1561
Size: 79.27 KB
Posted: 4/25/07
Middle, assembled		Right end, assembled
Hits: 1572
Size: 83.98 KB
Posted: 4/25/07
Right end, assembled		Since I don't have a truck with the right bedwalls, I can't actually test it, but it's rolled up fla...
Hits: 1592
Size: 63.26 KB
Posted: 4/25/07
Since I don't have a truck with the right bedwalls, I can't actually test it, but it's rolled up fla...
SOLD Cargo Cover (repaired) from '94-96 Eddie Bauer Bronco Actual dimensions: 5 lbs 61x3x2"
Hits: 1650
Size: 41.38 KB
Posted: 2/4/08
SOLD Cargo Cover (repaired) from '94-96 Eddie Bauer Bronco Actual dimensions: 5 lbs 61x3x2"		SOLD Cargo Cover (repaired) from '94-96 Eddie Bauer Bronco Actual dimensions: 5 lbs 61x3x2"
Hits: 1830
Size: 29.51 KB
Posted: 2/4/08
SOLD Cargo Cover (repaired) from '94-96 Eddie Bauer Bronco Actual dimensions: 5 lbs 61x3x2"		The front of the bedwall panel is the same for all '92-96, but the rear of '92-93 panels doesn't hav...
Hits: 1977
Size: 42.11 KB
Posted: 1/8/05
The front of the bedwall panel is the same for all '92-96, but the rear of '92-93 panels doesn't hav...		These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
Hits: 1512
Size: 51.61 KB
Posted: 11/29/04
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...		These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
Hits: 1546
Size: 30.1 KB
Posted: 11/29/04
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
Hits: 1531
Size: 54.17 KB
Posted: 11/29/04
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...		These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
Hits: 1435
Size: 40.94 KB
Posted: 11/29/04
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...		These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
Hits: 1497
Size: 52.1 KB
Posted: 11/29/04
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...		These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
Hits: 1452
Size: 52.79 KB
Posted: 11/29/04
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...		These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
Hits: 1440
Size: 54.18 KB
Posted: 11/29/04
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
Hits: 1426
Size: 47.64 KB
Posted: 11/29/04
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...		These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
Hits: 1634
Size: 45.32 KB
Posted: 11/29/04
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...		These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...
Hits: 1520
Size: 40.98 KB
Posted: 11/29/04
These pics are for adding slots to a '92-93 panel not originally molded with them, as '94-96 panels ...		Factory Bronco cargo cover fully extended. Factory cargo net missing. Aftermarket cargo tray visib...
Hits: 990
Size: 36.92 KB
Posted: 10/23/13
Factory Bronco cargo cover fully extended. Factory cargo net missing. Aftermarket cargo tray visib...		Factory Bronco cargo cover fully extended.
Hits: 1277
Size: 44.03 KB
Posted: 10/23/13
Factory Bronco cargo cover fully extended.
Fully retracted. Cargo tray is aftermarket, and factory cargo net is missing.
Hits: 1286
Size: 51.93 KB
Posted: 10/23/13
Fully retracted. Cargo tray is aftermarket, and factory cargo net is missing.		This is the draw rod from a cargo cover that was lying in the bed of a JY Bronco under a LARGE pile ...
Hits: 772
Size: 77.82 KB
Posted: 7/26/14
This is the draw rod from a cargo cover that was lying in the bed of a JY Bronco under a LARGE pile ...		This is after a few minutes' work... [url=http://www.supermotors.net/registry/media/1031134][img]ht...
Hits: 670
Size: 74.11 KB
Posted: 7/26/14
This is after a few minutes' work... [url=http://www.supermotors.net/registry/media/1031134][img]ht...		I probably spent 20 minutes to get it to this point. [url=http://www.supermotors.net/registry/media...
Hits: 684
Size: 73 KB
Posted: 7/26/14
I probably spent 20 minutes to get it to this point. [url=http://www.supermotors.net/registry/media...		 
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog