300ci I6 --DEAD!
----I threw rod...the 3rd I6 I have killed in this truck. ----As soon as I source a 4bt, that's what its gonna have.
----And all the I6 goodies below will be on ebay!
Clifford Water-Heated Intake
Dual outlet headers and dual exhaust
2bbl carb
Custom snorkel intake using conical K&N filter
On-board air
Underhood toolbox
AGR powersteering pump (it's OK)
Auto tranny cooler used as a power steering fluid cooler
Drivetrain:
NP435 manual trans (or T18...I never am sure)
NP208 transfer case
Ford 9" reassembled with a drain plug
Solid Dana 44 in front
Spool and 5.14's in the 9",
ARB and 5.13's for the SOLID Dana 44
37x12.5x15 Super Swamper SSR's in front
37x13x15 Super Swamper Boggers in back
-each of the 4 tires contain 8 golf balls for dynamic balancing
37x12.5x15 Super Swamper SSR spare.
Notes:
The nickname (Odey) is because when I bought the truck,
the F and R were missing from the FORD on the hood...O...D.
ADDITIONAL MODS
Front receiver hitch w/ a skidplate
shackle flip
dual shocks in back,
-but only one set in there right now
no sway bars
Ryan-spawned lengthened radius arms
fender trimming to remove rust / clear tires
in-cab timing retarding
-think it works, need to prove it
half doors
partial waterproofing
-drivetrain vents moved
-snorkel intake
-clutched fan
-water-resistant distributer
TireGate Clone...nice!
Does a trailer for hauling it on count as a modification? Maybe an accessory?
Still have:
NEW ENGINE!
more fender & body work to do
roll cage
more lights (rock lights, fog lights, etc)
on and on and on!
SOME PICTURES WERE LOST AT ONE POINT, IF THERE IS SOMETHING YOU WANT TO SEE FROM MY MODS THAT I DON'T HAVE A PICTURE UP FOR, LET ME KNOW AND I WILL GET IT POSTED.
AugPics 014.jpg 25 hits | 92.87 KB | Posted: 8/20/08 I'm hauling the last of the concrete sub-base sand in for the Bronco's new home; 896 sq-ft of fabrication shop!
AugPics 013.jpg 24 hits | 110.32 KB | Posted: 8/20/08 This is how you do a lowrider, country-boy style!
AugPics 016.jpg 18 hits | 73.87 KB | Posted: 8/20/08 Left to right you will see;
The vacuum attachment with catch can.
The platform where I will mount my 24V vacuum pump and batteries when I get around to it.
3/4" fitting where the vacuum draws from.
1/2" fitting where I can purge the tank of air o...
AugPics 015.jpg 34 hits | 83.1 KB | Posted: 8/20/08 My oil collection tank, a.k.a. the Super Sucker. 250 gallons of restaurant drum emptying suction! I'm particularly proud of the feet I welded up to keep it stable. I tested it by hauling home 180gal of vege oil in mid-August with no problems at al...
image003.jpg 11 hits | 64.19 KB | Posted: 8/11/08 He added some heavy-duty chain for extra support on the tailgate (note that he used the 'Heavy-Duty 'S' hooks to attach the chain) He also paid-up for some BIG 5/16 sheetmetal screws to attach the frame to the tailgate. Yeah, he knows it's overki...
image002.jpg 10 hits | 68.69 KB | Posted: 8/11/08 He's hooked up and ready to fly!! It's amazing how the extra weight really smoothed out the ride in the truck. He did have to air up the rear tires a bit (around 160 psi)
image001.jpg 20 hits | 75.75 KB | Posted: 8/11/08 How NOT to haul a trailer #1.
This lesson on how not to do things seems to totally escape some people. I'd love to see how the trip ended up but I feel confident he ended up in a ravine somewhere wondering why bad things seems to always happen t...
WaterlessWasher3.jpg 12 hits | 56.66 KB | Posted: 8/1/08 The Biodiesel is recirculated until the excess methanol evaporates...
GrahamsExample.gif 12 hits | 125.41 KB | Posted: 8/1/08 Ultimately leaving fuel just as clean as water washing, without using any water! (Graham Laming)
Most Viewed Files
9in drain.jpg 768 hits | 62.62 KB | Posted: 8/11/03 I added a drain to the 9inch so I don't have to crack the third member to change the gear oil after the gear break-in. Plus more oil will drain out the hole plug than could drain from the bottom of the third member openning. There is a magnet in the...
headers.jpg 601 hits | 37.66 KB | Posted: 4/21/04 The Clifford dual-exit headers. Take note: The order matters, I believe the front one goes on first. Also, the factory paint is just paint and will burn off (causing LOTS of smoke) so either strip and repaint or be happy with the eventual rust col...
445incher.jpg 422 hits | 30.07 KB | Posted: 9/15/04 Slaughtered my previous largest musky record by 6.5 inches! This one tapes out to 44.5"! It was a slob-monster!
intake.jpg 380 hits | 38.13 KB | Posted: 4/21/04 This is the Clifford water-heated intake with the 2-bbl from a 351. Replaces the 1-bbl and exhaut heated stock intake
445incher2.jpg 379 hits | 39.19 KB | Posted: 9/15/04 I was seriously stoked!
skorkall.jpg 370 hits | 37.75 KB | Posted: 1/14/04 The whole external skorkel. Multiple braces so it doesn't wobble.
