3. Install and seat camshaft cap cluster assemblies. Hand-start 14 bolts.

NOTE: Each camshaft cap cluster assembly is tightened individually.

4. Tighten camshaft cap cluster retaining bolts in sequence to 8-12 N-m (6.0-8.8 lb-ft).

5. Loosen 14 camshaft cap cluster retaining bolts approximately two turns or until head of bolt is free.

NOTE: Camshaft should turn freely with a slight drag.

6. Retighten all bolts in sequence to 8-12 N-m (6.0-8.8 lb-ft).

7. Check camshaft end play using Rotunda Dial Indicator with Bracketry 014-00282 or equivalent.

Owner caption January 2005 · Photo 90 of 980