SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1980–1986/ “Jezebel”/ Sagnaw Power steering swap supermotors.net/registry/6364/55687

Album section

Sagnaw Power steering swap

From 1983 Ford Bronco “Jezebel” — documented by michael collins.

23 photos
← Back to this vehicle
1983 Ford Bronco - this is the stock p/s pump 1983 Ford Bronco - here is the side shot of the stock pump. 1983 Ford Bronco - after removing the pulley and the 3 bolts the P/S pump came right off. 1983 Ford Bronco - here is the front of the bracket withthe P/s removed. it looks like i have to get a different bracket. 1983 Ford Bronco - as i was removing the AC compressor from the old mount i found they used a couple spacers. i found out this was due to the bolts having a l… 1983 Ford Bronco - here is the bottom spacer. 1983 Ford Bronco - here is the old mount there is 2 bolts on the top and two bolts and two nuts on the bottom 1983 Ford Bronco - here is the motor with the bracket removed. i need to clean the motor some more.. 1983 Ford Bronco - Here is the front of the motor no bracket. 1983 Ford Bronco - here is the old mount off of the motor. 1983 Ford Bronco - well i went to 6 different junk yards and found only one van with a 4.9 the rest had V-8s. i got the pump and bracket and belt tensioner fo… 1983 Ford Bronco - here is the new pump it is an oilly mess right now. 1983 Ford Bronco - here is the other side of the new pump. 1983 Ford Bronco - i washed the motor down again and here is a shot before the new mbrackets goes on. 1983 Ford Bronco - the new mount is in place and the old AC compressor and spacers are installed. 1983 Ford Bronco - here is a side view of the new mount and AC compressor installed. 1983 Ford Bronco - here is the new P/S pump in place. this stuff cleaned up real good. 1983 Ford Bronco - a side view of the new pump installed. 1983 Ford Bronco - i then installed the serp belt pulley. 1983 Ford Bronco - I then removed the old hose ends and all that is needed is a new pressure hose for E150 van and a new return line and fluide and the motor… 1983 Ford Bronco - the motor is now ready to go in the bronco. the 3G is the smaller one for now. the P/S pump swap is done. i just need the High pressure hos… 1983 Ford Bronco - ok next step i went to NAPA and got the return line Part number 7-1899 and the pressure line (from a E150 van) Part number 7-3344. 1983 Ford Bronco - Here are the parts out of the box and ready to go on Jezebel