Steve83 > 1995 Ford F-150 > open folder Bed Bolts

Original pre-'98 F-series bed bolts are carriage-type, with long square or oval bosses under the hea...
Originals.jpg
172 hits | 80.65 KB | Posted: 1/30/24
Original pre-'98 F-series bed bolts are carriage-type, with long square or oval bosses under the hea...
This bolt spun, so I welded a temporary grip to the head. After removal, I removed the grip, and wel...
Grip Splines.jpg
181 hits | 76.12 KB | Posted: 1/30/24
This bolt spun, so I welded a temporary grip to the head. After removal, I removed the grip, and wel...
Don't forget to remove any OTHER bolts holding the bed down, before attempting to lift it off. But t...
Others.jpg
184 hits | 72.63 KB | Posted: 2/4/24
Don't forget to remove any OTHER bolts holding the bed down, before attempting to lift it off. But t...
These aftermarket bolt kits are affordable, and good enough, with 8mm Allen (hex recess) heads. At l...
BedBoltCmprF.jpg
159 hits | 71.76 KB | Posted: 1/30/24
These aftermarket bolt kits are affordable, and good enough, with 8mm Allen (hex recess) heads. At l...
Aftermarket long bolt dimensions in mm.IF THE IMAGE IS TOO SMALL, click it.
BedBoltNew.jpg
154 hits | 88.7 KB | Posted: 1/30/24
Aftermarket long bolt dimensions in mm.
IF THE IMAGE IS TOO SMALL, click it.
Aftermarket nuts included with bed bolts are crimped too much. If they're simply installed, they'll ...
BedBoltChased.jpg
164 hits | 80.91 KB | Posted: 1/30/24
Aftermarket nuts included with bed bolts are crimped too much. If they're simply installed, they'll ...
I sometimes use this portable gantry (made from scrap metal: a 5" Aluminum I-beam, some 1.5" straigh...
BedLift96.jpg
191 hits | 96.59 KB | Posted: 1/30/24
I sometimes use this portable gantry (made from scrap metal: a 5" Aluminum I-beam, some 1.5" straigh...
After thoroughly washing the frame (and whatever repairs prompted removing the bed are completed & c...
20221017_181012.jpg
206 hits | 146.78 KB | Posted: 1/30/24
After thoroughly washing the frame (and whatever repairs prompted removing the bed are completed & c...
The hole over the axle needs to be enlarged just this much for the later bolts to fit.IF THE IMAGE ...
MidBedHole.jpg
154 hits | 49.52 KB | Posted: 1/30/24
The hole over the axle needs to be enlarged just this much for the later bolts to fit.
IF THE IMAGE ...
Lifting the bed is easier than it sounds - it doesn't weigh much, and an empty one can be lifted by ...
BedLift4.jpg
193 hits | 84.47 KB | Posted: 1/30/24
Lifting the bed is easier than it sounds - it doesn't weigh much, and an empty one can be lifted by ...
Undercoating the exposed threads will protect them from rust, without interfering with removal.IF T...
BedBolts95new.jpg
163 hits | 50.97 KB | Posted: 1/30/24
Undercoating the exposed threads will protect them from rust, without interfering with removal.
IF T...
'94 F150 DimensionsIF THE IMAGE IS TOO SMALL, click it.See also:https://www.fordpro.com/en-us/up...
F150Line94.jpg
0 hits | 80.84 KB | Posted: 7/27/25
'94 F150 Dimensions
IF THE IMAGE IS TOO SMALL, click it.

See also:
https://www.fordpro.com/en-us/up...