SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”

Join

Home/ Registry/ Ford/ F-150/ 1992-1996/ 1995 F-150/ CutFenders supermotors.net/registry/10850/59752

Album section

CutFenders

From 1995 Ford F-150, documented by Paul Lackey.

19 photos

← Back to this vehicle

1995 Ford F-150 - A little rub on the front fender.

1995 Ford F-150 - What it looks like stock.

1995 Ford F-150 - Taped off. Cut on right. Bend on left.

1995 Ford F-150 - All cut.

1995 Ford F-150 - The offending piece of metal.

1995 Ford F-150 - Fender is 2 layers so you have to cut the back piece out so that the front can be rolled in.

1995 Ford F-150 - What the inside looks like once the inner layer of metal is hacked out.

1995 Ford F-150 - Cut along the seam of the fender and start bending.

1995 Ford F-150 - All bent. Use big pliers and hammer to bend.

1995 Ford F-150 - Nuther

1995 Ford F-150 - My welding buddy, JB.

1995 Ford F-150 - Scab on a piece of scrap metal behind the gap with jb weld and use a little more jb to hold the bottom pieces together (clamp).

1995 Ford F-150 - Bondo applied in thin coats to cover small imperfections. Don't go overboard with the bondo.

1995 Ford F-150 - Ready for paint.

1995 Ford F-150 - All done.

1995 Ford F-150 - Compared to before picture.

1995 Ford F-150 - Dark grey areas are where tires rubbed fender.

1995 Ford F-150 - Dark grey areas are where tires rubbed fender.

1995 Ford F-150 - Close-up of the front wheel-opening lip on a red pickup fender, with three white circles drawn on the image to mark rub marks and scuffed p…