BackofFace.JPG
542 hits | 21.92 KB | Posted: 6/29/03
An ugly mess, but you can see the back of the head unit, and the rear bracket.

Clamps.JPG
502 hits | 25.22 KB | Posted: 6/29/03
Use big vice grips or pliers to clamp the connectors on the wires, then put a wrap of duct or electr...

Face.JPG
685 hits | 27.32 KB | Posted: 6/29/03
The finished face assembly

Finished.JPG
537 hits | 33.24 KB | Posted: 6/29/03
The amp all wired, waiting to be mounted on the sub box.

FuseboxA.JPG
536 hits | 44.68 KB | Posted: 6/29/03
Leave some slack on the power wire in the engine box. This lets you pick where you want to mount th...

Fuseboxsecured.JPG
1878 hits | 32.57 KB | Posted: 6/29/03
I put the fuse box on the MAF, leaving the red wire exposed as an accent. I used those zip-ties (ca...

Grounddrill.JPG
695 hits | 22.51 KB | Posted: 6/29/03
Use a self tapping screw for the ground mount.

Hidetheground.JPG
551 hits | 28.26 KB | Posted: 6/29/03
This is a good spot for the ground, out of the way and easily concealed.

Plugs.JPG
512 hits | 24.21 KB | Posted: 6/29/03
Amp is pluged in and powered up.

Powerableflange.JPG
609 hits | 20.84 KB | Posted: 6/29/03
Engine side of the power cable passthru.

Powercableflangeinside.JPG
684 hits | 45.47 KB | Posted: 6/29/03
The power passthru on the inside. The hole in the firewall is about 2 inches past the insulation. ...

Wires.JPG
586 hits | 36.38 KB | Posted: 6/29/03
You can just barely see the child seat bracket from here.

POWER!.JPG
665 hits | 35.41 KB | Posted: 6/29/03
The amp all mounted, the rear seats folded down.

Orange....JPG
712 hits | 18.05 KB | Posted: 6/29/03
Spectrum Analysis in orange...

Or_Green.JPG
666 hits | 24.16 KB | Posted: 6/29/03
Spectrum analysis in green

sub.JPG
653 hits | 32.92 KB | Posted: 6/29/03
THUMP THUMP THUMP...

box.JPG
677 hits | 20.59 KB | Posted: 6/29/03
The enclosure.