SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992–1996/ “Bronkzilla”/ Full Cage supermotors.net/registry/1249/17488

Album section

Full Cage

From 1995 Ford Bronco “Bronkzilla” — documented by Rafael Esqueda.

16 photos
← Back to this vehicle
1995 Ford Bronco - Started off by welding some 1/4" thick plates where the cage points would be. It has a nut welded to it for the cage to frame mounts.. It w… 1995 Ford Bronco - shows the points on the body. same on the other side. 1995 Ford Bronco - Didnt have much help so i used whatever i could to mock things up.. 1995 Ford Bronco - This was some of the first setup i had for the rear.. I added more to it but later changed the design.. 1995 Ford Bronco - the front cage. i wanted to be able to use my visors with the cage so i designed it around that. 1995 Ford Bronco - Worked on the spreaders. Wanted to keep the dome light so i worked in that 180* bend. 1995 Ford Bronco - triangulated the spreaders and gave them a slight bend to get them closer to the roof.. Contrary to popular belief there is a ton of headro… 1995 Ford Bronco - shows the rear half and the seat belt mounts welded to the cage. 1995 Ford Bronco - 1/2" Grade 8 bolt welded to the cage for the upper seatbelt mount. 1995 Ford Bronco - I designed the cage in 2 main pieces so that i could remove it, weld it up, paint it, slap it back on, weld the pieces together and to the… 1995 Ford Bronco - front half of the cage coming out. 1995 Ford Bronco - welded it up. taped off the areas that still need welding and painted it 1995 Ford Bronco - front half. you can see the gussets i used for the funky front part. 1995 Ford Bronco - finished pic.. 1995 Ford Bronco - shows the seatbelt mounts.. 1995 Ford Bronco - finished shot with the top on..