carrier1.jpeg 7319 hits | 65.71 KB | Posted: 4/14/04 First setup had a spare tire carrier mounted on the bumper.. It worked well but with the 38x15.5 tir...
carrier2.jpeg 1981 hits | 59.88 KB | Posted: 4/14/04 it was holding the truck up here. i rocked it back and forth to try to get off which caused the stee...
carrier3.jpeg 1841 hits | 49.82 KB | Posted: 4/14/04 after a long day of wheeling and bouncing around we decided to rip the carrier off.. took a bit but ...
bigmike1.JPG 1648 hits | 34.29 KB | Posted: 4/14/04 some pictures of the bumper.. Its real strong. i welded my fender tubing directly to it.
bigmike3.JPG 1825 hits | 45.23 KB | Posted: 4/14/04 and another.. its got a hitch tube on it as well.
bigmike4.JPG 1665 hits | 51.92 KB | Posted: 4/14/04 the d-ring setup is also really strong.. it actually goes through the bumper and is the piece that c...
bigmike5.JPG 1606 hits | 52.1 KB | Posted: 4/14/04 closeup of the receiver tube.
bigmike6.JPG 1583 hits | 61.76 KB | Posted: 4/14/04 view from the back. its got the stuff back there for the safety chain.
bigmike8.JPG 1487 hits | 58.99 KB | Posted: 4/14/04 all 3 holes lined up perfect. IF you have a 92-96 bronco contact big mike for one of these bumpers.....
cans1.jpeg 1625 hits | 32.63 KB | Posted: 4/14/04 so the tires were kinda big before. .now with the 42x15" tires on hummer beadlock wheels its way too...
cans2.jpeg 1658 hits | 51.13 KB | Posted: 4/14/04 first thing i did was redo the tubing where the can holder would be welded to. i also moved the hi-l...
cans3.jpeg 1610 hits | 42.41 KB | Posted: 4/14/04 they sit snugly in this holder i made out of 2x2x 1/4" thick angle.....
cans4.jpeg 1914 hits | 55.16 KB | Posted: 4/14/04 welded it to the swing out carrier.
cans5.jpeg 1552 hits | 38.77 KB | Posted: 4/14/04 side view.. doesnt stick out much.
cans6.jpeg 1432 hits | 38.19 KB | Posted: 4/14/04 view from the bottom. the cans are pretty well protected if i land hard on something..
cans7.jpeg 1665 hits | 54.66 KB | Posted: 4/14/04 made this to hold the cans in. got the idea from a member on www.fullsizebronco.com
cans8.jpeg 1553 hits | 52.26 KB | Posted: 4/14/04 has a hinge and swings open. when its closed you can put a lock on it to keep it secure..
cans9.jpeg 1702 hits | 49.98 KB | Posted: 4/14/04 shows the carrier open and the tailgate down. works pretty good.
cans11.jpeg 2188 hits | 37.76 KB | Posted: 4/14/04 Painted them white to kinda go with the bronco. painted the handles. red for gas and blue for water....
miscbumperdims.gif 1665 hits | 2.57 KB | Posted: 4/14/04 Just a couple of dimensions. If you want one built for you contact big mike on www.FullSizeBronco.co...
Rear Bumper + Gas/Water Can Holder
