SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992–1996/ 1992 Bronco/ How-Tos and Part Replacement supermotors.net/registry/16352/56496

Album section

How-Tos and Part Replacement

From 1992 Ford Bronco, documented by KGunner.

9 photos
← Back to this vehicle
1992 Ford Bronco - You will need to start in the glovebox. No tools needed for the removal of it. But you will need a 7mm and 8mm socket, pliers, a drain pan,… 1992 Ford Bronco - You will see one of these on each side, just pull them in and the box will drop leaving one little thing. 1992 Ford Bronco - Now just lift the box up and it is out. Put it off to the side. 1992 Ford Bronco - Now unbolt and unplug this to get to the heater box. 1992 Ford Bronco - Once that is off take off the cover to the heater box. There are 6-8 8mm screws and some wires anchored to it. There is also a cable on the… 1992 Ford Bronco - Now you will be looking at the heater core itself. 1992 Ford Bronco - Now pop the hood and go the passenger side of the engine compartment. Place a drain pan under these hoses to catch the coolant. You will se… 1992 Ford Bronco - From the engine compartment push on the two pipes that come through in order to push the heater core out of its box. Pull from the inside a… 1992 Ford Bronco - Here is the old heater core next to the new one. Now just put the new one into the box, reattach the hoses on the outside, put the cover ba…