The truck 040.jpg
925 hits | 107.54 KB | Posted: 8/1/07

Dyno with music.wmv
636 hits | 34.54 MB | Posted: 8/2/07

Fuel pump bracket.jpg
416 hits | 51.43 KB | Posted: 8/2/07

Bottle Switches.jpg
417 hits | 50.77 KB | Posted: 8/2/07
In cab fuel & nitrous pressure gauges, switches for remote nitrous bottle openers, adjustable timing...

Throttle.jpg
562 hits | 61.14 KB | Posted: 8/2/07
Custom throttle linkage with heim joints, threaded rod and stainless sleeve.

Grant Steering Wheel.JPG
3812 hits | 107.6 KB | Posted: 8/2/07
Auto meter fuel level and speedo installed in gauge pod with LEDs for turn signal and high beam. Mon...

Rear view of fuel pump & filters.JPG
473 hits | 73.02 KB | Posted: 8/2/07
Aeromotive fuel pump and filters. Custom aluminum bracket holds assembly.

Gastank 1.jpg
391 hits | 49.85 KB | Posted: 8/2/07
Start with a brand new tank and drill holes. That was the hardest part.

Gastank 2.jpg
379 hits | 60.23 KB | Posted: 8/2/07
Form fit and welded on rear sump.

Gastank 3.jpg
381 hits | 31.48 KB | Posted: 8/2/07
Used the POR-15 kit to clean, prep and paint the tank. It was then taken to a shop and pressure test...

Emblem.jpg
433 hits | 51.94 KB | Posted: 8/2/07

Twin 50# Nitrous bottles.JPG
688 hits | 87.13 KB | Posted: 8/2/07
Final product, custom aluminum cradle holding two 50# nitrous bottles with NOS high flow valves and ...

Remote bottle openers.JPG
423 hits | 79.82 KB | Posted: 8/2/07
Cold fusion remote bottle openers and custom made NOS decals for bottles.

Inside hood scoop.jpg
476 hits | 68.38 KB | Posted: 8/2/07
Looking in on Ram-Air box.

March pulley system.JPG
462 hits | 106.75 KB | Posted: 8/2/07
March serpentine pulleys with billet PS pump.

Valve cover puke tank.JPG
694 hits | 109.54 KB | Posted: 8/2/07

Driveshaft hoop.JPG
675 hits | 93.55 KB | Posted: 8/2/07

Hoop over driveshaft.JPG
649 hits | 104.34 KB | Posted: 8/2/07

Hoop mounts.JPG
415 hits | 87.92 KB | Posted: 8/2/07
3/8" plate cut and welded to make C mount, plasma cut to fit axle and Mig welded to axle tube. 5/8" ...

Burnout.JPG
395 hits | 25.89 KB | Posted: 8/3/07
An expensive display of lack of traction.

The aftermath.JPG
367 hits | 47.83 KB | Posted: 8/3/07

Cleaned up oil returns.jpg
417 hits | 53.4 KB | Posted: 8/3/07
Oil returns in block were ground to allow better oil return to pan.

Fuel regulator.jpg
2521 hits | 70.75 KB | Posted: 8/3/07
Aeromotive fuel pressure regulator feeding 850 Demon, fuel pressure gauge and nitrous fuel solenoid.

The idea.jpg
385 hits | 32.65 KB | Posted: 8/3/07
When the bottles could be converted to nitrous then came a way to mount them. This was the original ...

Original bottles.jpg
357 hits | 54.81 KB | Posted: 8/3/07
These two 50# CO2 bottles were used. They were hydrostaticly tested and filled with nitrous with NOS...

Starting assembly.jpg
333 hits | 47.17 KB | Posted: 8/3/07
Just after starting it was discovered we needed to change the design, went to a bolted yoke to hold ...

Base assembly.jpg
367 hits | 52.85 KB | Posted: 8/3/07
The base assembly is welded.

Working on the base.jpg
348 hits | 48.96 KB | Posted: 8/3/07

Base with yoke.jpg
383 hits | 52.85 KB | Posted: 8/3/07
Welded base with yoke assembled.

Machined acorn nut for yoke.jpg
355 hits | 39.6 KB | Posted: 8/3/07

Trial fit of yokes.jpg
361 hits | 48.34 KB | Posted: 8/3/07

Mockup assembly for welding.jpg
406 hits | 54.5 KB | Posted: 8/3/07
When it came time to weld the yoke supports the bottles would be unwieldly. Sono tubes work great as...

Welding mockup.jpg
407 hits | 57.25 KB | Posted: 8/3/07

Final assembly.jpg
408 hits | 54.8 KB | Posted: 8/3/07
Welding completed.

Final assembly 2.jpg
421 hits | 57.61 KB | Posted: 8/3/07
Started with a Tig welder but as the assembly grew larger the heat needed kept tripping breakers. Sw...

Ready to mount.jpg
468 hits | 51.22 KB | Posted: 8/3/07
After lots of work and changes the final cradle is ready to be bolted to the truck bed.

Aluminum fuel pump bracket.jpg
506 hits | 43.98 KB | Posted: 8/3/07
Fabbed up a aluminum fuel pump bracket.

Passenger side of motor.JPG
492 hits | 102.38 KB | Posted: 8/6/07

Overview of motor.JPG
570 hits | 107.17 KB | Posted: 8/6/07
14 X 5 Ram Air box, Flaming River steering shaft, Mark VIII electric fan & electronic controller.

Drivers side of motor.JPG
579 hits | 102.97 KB | Posted: 8/6/07

CIMG3166.JPG
622 hits | 103.69 KB | Posted: 9/9/07
FRPP valve covers

CIMG3162.JPG
575 hits | 74.17 KB | Posted: 9/9/07
Polished stainless 14" Magnaflows with welded stainless Magnaflow tips.

The new mufflers.wmv
927 hits | 20.38 MB | Posted: 9/23/07
The new Magnflows

P1000965.JPG
586 hits | 73.05 KB | Posted: 9/28/08
Twin stick transfer case shifters

P1000704.JPG
581 hits | 75.46 KB | Posted: 9/28/08
Rear axle braces

Fuel Cell Bracket.JPG
522 hits | 76.02 KB | Posted: 4/14/09
Aluminum bracket for Water/Methanol Cell

Fuel Cell with Bracket.JPG
476 hits | 73.87 KB | Posted: 4/14/09
Water/Methanol Cell with Aluminum Bracket