SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Model T/ 1912 Model T/ Rear axle rebuild supermotors.net/registry/18177/68240

Album section

Rear axle rebuild

From 1912 Ford Model T, documented by 68Wcode427.

14 photos
← Back to this vehicle
1912 Ford Model T - A greasy cast-iron bellhousing/transmission cover viewed face-on, showing a central splined hub opening surrounded by a ring of bolt holes… 1912 Ford Model T - Blurry macro close-up of an orange-painted cast iron component with a raised triangular foundry mark cast into the surface next to a machin… 1912 Ford Model T - A bell-shaped cast axle housing with an attached tube, freshly painted reddish-orange, standing upright on a concrete garage floor. Rows of… 1912 Ford Model T - Mil-8802 B1/2 sealant used to prevent leaks at the rivets 1912 Ford Model T - Many used Hyatt bearings were inspected an measured for wear. Four were found to be .498" or better out of eight. Two were rejected for loo… 1912 Ford Model T - An orange antique Ford Model T body sits raised on jack stands in a home garage, with the front axle and driveline components disassembled… 1912 Ford Model T - Close-up of an orange-painted axle or gear housing shaft with an exposed pinion gear and mounting flange, stamped 'T191B' with a triangle m… 1912 Ford Model T - Close-up of a large bevel ring gear and differential/gearcase housing with a splined shaft coated in red assembly grease protruding to the… 1912 Ford Model T - An orange-painted driveshaft or axle component with an exposed universal joint spider sits on a worn wooden workbench, alongside a can of P… 1912 Ford Model T - Close-up of a disassembled axle or differential assembly showing a large ring gear, hub with bolts and safety wire, and a splined shaft wit… 1912 Ford Model T - A metal cylindrical sleeve or bushing stamped 'RBC ... MADE IN USA' sits on a worn, greasy workbench alongside a curved sheet-metal offcut.… 1912 Ford Model T - A metal cylindrical part or bushing marked 'RBC 4242 MADE IN USA' rests on a workbench alongside a pneumatic die grinder fitted with a cut-… 1912 Ford Model T - A metal exhaust component or muffler shell resting on a dirty workshop floor, marked with 'MADE IN USA' text and a handwritten 'L/H' in bla… 1912 Ford Model T - An open one-pound can of Mobilgrease 28 (red/burgundy grease) sits on a workbench next to a greased tubular metal part wrapped in paper tow…