SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992-1996/ 1995 Bronco/ rotor pressing supermotors.net/registry/19344/74348

Album section

rotor pressing

From 1995 Ford Bronco, documented by sackman9975.

24 photos
← Back to this vehicle
1995 Ford Bronco - Tight close-up of a wheel hub and brake rotor on the ground while a rusty sledge hammer head drives a wheel stud out from the back, the thr… 1995 Ford Bronco - Parts for a vehicle brake job are laid out on the ground, including a hub assembly and rotors. 1995 Ford Bronco - A hand holds a brake rotor and hub assembly next to a can of PB Blaster and a metal rod on a concrete surface. 1995 Ford Bronco - Close-up view of a wheel hub with splines and a brake rotor, showing the mounting studs and lug nut. 1995 Ford Bronco - A new brake rotor sits on the ground next to a tire and a can of spray. 1995 Ford Bronco - A close-up view of a single wheel stud, showing its threaded shaft and the surrounding metal surface. 1995 Ford Bronco - A close-up view of a brake rotor pressing, showing a threaded bolt and metallic texture. 1995 Ford Bronco - A close-up view of a rotor pressing, with the Supermotors.net logo visible at the bottom. 1995 Ford Bronco - Blurry extreme close-up of a bolt or fastener head on a dark metal component with reddish staining, likely a chassis or driveline part. Det… 1995 Ford Bronco - Extreme close-up of the toothed teeth of an ABS tone ring with the rounded end of a wheel stud lying across it, showing the interference be… 1995 Ford Bronco - Close-up of a rusty wheel hub flange and brake rotor with every wheel stud removed, leaving bare empty stud holes ringed by corrosion. The… 1995 Ford Bronco - A red-handled hammer and punch are used to drive a toothed ABS tone ring onto a wheel hub still attached to its brake rotor, with the orang… 1995 Ford Bronco - A rusty front hub and brake rotor assembly lying face-up on concrete, with the internally splined locking-hub barrel visible in the center… 1995 Ford Bronco - A removed vented brake rotor lying face-up on cracked concrete, its friction surface scored and lipped from wear and the stud holes empty.… 1995 Ford Bronco - Close-up of a hub and brake rotor assembly resting on an orange shop rag on gravel, with the internally splined hub barrel standing up in t… 1995 Ford Bronco - A rusty deep socket is stacked over a wheel stud on a hub as an improvised press, with a second socket or drive extension seated on top of… 1995 Ford Bronco - A rusty socket sits upright over one wheel stud on a hub, with a lug nut visible down inside the socket bore. The hub is bolted to a machin… 1995 Ford Bronco - A hand holds a heavily rusted impact socket stamped "1 1/4" close to the camera, with a retaining-pin hole visible in its side. An air impa… 1995 Ford Bronco - A hand holds a rusty impact socket up to the camera, showing the square drive opening in its base. A brake rotor and hub with wheel studs s… 1995 Ford Bronco - A toothed ABS tone ring lies on a concrete floor surrounded by five rusty knurled wheel studs that have been pressed out of the hub. A brak… 1995 Ford Bronco - Close-up of a wheel hub bolted to a vented brake rotor, with new wheel studs installed and one gold-zinc open-end lug nut threaded on to pu… 1995 Ford Bronco - Lisle 22800 Wheel Stud Installer product packaging showing instructional photos and trilingual install text. 1995 Ford Bronco - A close-up view shows a lug nut with a specialized socket tool being used to tighten it onto a rusty brake rotor assembly. A portion of a s… 1995 Ford Bronco - A close-up view shows a metal hub with splines, attached to a rusty brake rotor. A black circular tool with a threaded bolt is mounted to t…