Bill Crozier > 1992 Ford Bronco > open folder Radiator

Backing the old girl onto the lift.
Picture 003.jpg
403 hits | 100.31 KB | Posted: 12/25/09
Backing the old girl onto the lift.
In this shot, you can see that the lift is rated for 9000 LBS. I should be fine.
Picture 004.jpg
367 hits | 84.58 KB | Posted: 12/25/09
In this shot, you can see that the lift is rated for 9000 LBS.
I should be fine.
Here is all I need to do an oil change.. yeah right.
Picture 008.jpg
374 hits | 95.7 KB | Posted: 12/25/09
Here is all I need to do an oil change.. yeah right.
Before twisting a wrench, I decided to try to find the oil leak. I am 99% sure it is the rear main s...
Picture 005.jpg
412 hits | 102.29 KB | Posted: 12/25/09
Before twisting a wrench, I decided to try to find the oil leak. I am 99% sure it is the rear main s...
I actually had to lower the lift because my oil catch was too short. This isn't a problem with the ...
Picture 009.jpg
348 hits | 86.45 KB | Posted: 12/25/09
I actually had to lower the lift because my oil catch was too short.
This isn't a problem with the ...
Picture 010.jpg
Picture 010.jpg
307 hits | 109.69 KB | Posted: 12/25/09
These next few pictures are the aftermath of the oil filter after a long screwdriver and a hammer.
Picture 011.jpg
300 hits | 107.43 KB | Posted: 12/25/09
These next few pictures are the aftermath of the oil filter after a long screwdriver and a hammer.
Picture 012.jpg
Picture 012.jpg
327 hits | 105.97 KB | Posted: 12/25/09
And the aftermath of me not paying attention to the shards of metal.. That one was to the bone.
Picture 013.jpg
435 hits | 81.47 KB | Posted: 12/25/09
And the aftermath of me not paying attention to the shards of metal..
That one was to the bone.
Now for the radiator swap. I have already drained it and flushed the engine. First off comes the o...
Picture 014.jpg
451 hits | 112.97 KB | Posted: 12/25/09
Now for the radiator swap.
I have already drained it and flushed the engine.
First off comes the o...
We also have two bolts along the top. these hold in this coolant line which goes to the intake and i...
Picture 015.jpg
447 hits | 102.57 KB | Posted: 12/25/09
We also have two bolts along the top. these hold in this coolant line which goes to the intake and i...
The upper radiator hose now needs to come off.
Picture 016.jpg
394 hits | 84.49 KB | Posted: 12/25/09
The upper radiator hose now needs to come off.
Here you will need a 5/8 and a 1/2 inch line wrench. The key is to hold the 5/8 still while taking ...
Picture 018.jpg
538 hits | 90.43 KB | Posted: 12/25/09
Here you will need a 5/8 and a 1/2 inch line wrench.
The key is to hold the 5/8 still while taking ...
a 10mm takes the two radiator supports off
Picture 019.jpg
446 hits | 85.46 KB | Posted: 12/25/09
a 10mm takes the two radiator supports off
And here it sits. That white crap is some JB weld type of stuff which is supposed to fix radiator c...
Picture 020.jpg
437 hits | 103.36 KB | Posted: 12/25/09
And here it sits.
That white crap is some JB weld type of stuff which is supposed to fix radiator c...
As you can see, there was still a bit of a leak
Picture 021.jpg
411 hits | 108.24 KB | Posted: 12/25/09
As you can see, there was still a bit of a leak
Here is a side by side comparison of the two. It is important to note that I neglected to bring ext...
Picture 023.jpg
377 hits | 90.71 KB | Posted: 12/25/09
Here is a side by side comparison of the two.
It is important to note that I neglected to bring ext...
Being low on fluids, I decided against driving it so, it will stay there until Saturday when I can p...
Picture 024.jpg
361 hits | 96.67 KB | Posted: 12/25/09
Being low on fluids, I decided against driving it so, it will stay there until Saturday when I can p...