DSCF0029.JPG
456 hits | 81.57 KB | Posted: 6/14/10
This is Olaf's C4AE-B 427 crank as I received it.

DSCF0030.JPG
591 hits | 53.04 KB | Posted: 6/14/10

DSCF0056.JPG
667 hits | 69.49 KB | Posted: 9/16/10
The main grooves have now been cut, just needs a polish & good cleanup. Flywheel is a 427, will do a...

DSCF0072.JPG
549 hits | 76.53 KB | Posted: 9/25/10

DSCF0073.JPG
351 hits | 78.65 KB | Posted: 9/25/10
Crank has had mains grooved, magged, checked for twist/straightness, polished & miked. It is on .02...

DSCF0074.JPG
395 hits | 60.61 KB | Posted: 9/25/10
Started with a standard bore C4AE-A 427 block, no windows, blow-ups, etc.. 3L4 date, magged, pressur...

DSCF0075.JPG
389 hits | 70.72 KB | Posted: 9/25/10

DSCF0076.JPG
392 hits | 73.76 KB | Posted: 9/25/10

DSCF0077.JPG
350 hits | 67.6 KB | Posted: 9/25/10

DSCF0078.JPG
383 hits | 83.77 KB | Posted: 9/25/10

DSCF0080.JPG
373 hits | 70.04 KB | Posted: 9/25/10

DSCF0056.JPG
361 hits | 59.89 KB | Posted: 10/23/10

DSCF0057.JPG
358 hits | 51.23 KB | Posted: 10/23/10

DSCF0058.JPG
372 hits | 67.46 KB | Posted: 10/23/10

DSCF0059.JPG
370 hits | 55.52 KB | Posted: 10/23/10

DSCF0060.JPG
365 hits | 65.3 KB | Posted: 10/23/10

DSCF0061.JPG
405 hits | 69.48 KB | Posted: 10/23/10

DSCF0062.JPG
369 hits | 72.78 KB | Posted: 10/23/10

DSCF0063.JPG
356 hits | 69.02 KB | Posted: 10/23/10

DSCF0064.JPG
344 hits | 76.33 KB | Posted: 10/23/10

DSCF0067.JPG
386 hits | 67.43 KB | Posted: 10/23/10

DSCF0057.JPG
341 hits | 70.84 KB | Posted: 10/26/10

DSCF0058.JPG
352 hits | 59.99 KB | Posted: 10/26/10

DSCF0059.JPG
372 hits | 63.03 KB | Posted: 10/26/10

DSCF0082.JPG
399 hits | 62.43 KB | Posted: 9/25/10
KB pistons, 20 cc dish, Scat H-beams, 6.49" ctr/ctr, .975" pin. Pistons & rods weight matc...

DSCF0056.JPG
345 hits | 68.31 KB | Posted: 10/26/10

DSCF0060.JPG
356 hits | 65.88 KB | Posted: 10/26/10

DSCF0061.JPG
321 hits | 72.26 KB | Posted: 10/26/10

DSCF0065.JPG
334 hits | 71.31 KB | Posted: 10/26/10

DSCF0056.JPG
314 hits | 72.75 KB | Posted: 10/28/10

DSCF0057.JPG
321 hits | 79.88 KB | Posted: 10/28/10

DSCF0058.JPG
342 hits | 75.73 KB | Posted: 10/28/10

DSCF0059.JPG
346 hits | 60.5 KB | Posted: 10/28/10

DSCF0060.JPG
374 hits | 70.93 KB | Posted: 10/28/10

DSCF0061.JPG
351 hits | 66.07 KB | Posted: 10/28/10

DSCF0062.JPG
339 hits | 63.46 KB | Posted: 10/28/10

DSCF0063.JPG
370 hits | 65.27 KB | Posted: 10/28/10

DSCF0064.JPG
350 hits | 67.64 KB | Posted: 10/28/10

DSCF0065.JPG
325 hits | 65.93 KB | Posted: 10/28/10

DSCF0066.JPG
313 hits | 59.06 KB | Posted: 10/28/10

DSCF0067.JPG
341 hits | 71.03 KB | Posted: 10/28/10

DSCF0068.JPG
320 hits | 78.28 KB | Posted: 10/28/10

DSCF0069.JPG
321 hits | 73.39 KB | Posted: 10/28/10

DSCF0070.JPG
345 hits | 74.84 KB | Posted: 10/28/10

DSCF0071.JPG
348 hits | 73.15 KB | Posted: 10/28/10

DSCF0072.JPG
390 hits | 74.67 KB | Posted: 10/28/10

DSCF0075.JPG
364 hits | 69.63 KB | Posted: 10/28/10

DSCF0076.JPG
351 hits | 77.29 KB | Posted: 10/28/10

DSCF0077.JPG
352 hits | 67.91 KB | Posted: 10/28/10

DSCF0078.JPG
330 hits | 68.95 KB | Posted: 10/28/10

DSCF0079.JPG
350 hits | 59.88 KB | Posted: 10/28/10

DSCF0080.JPG
369 hits | 69.93 KB | Posted: 10/28/10

DSCF0059.JPG
362 hits | 72.51 KB | Posted: 10/29/10

DSCF0060.JPG
326 hits | 77.42 KB | Posted: 10/29/10
This is not the ignition system that will go on engine, I just needed something to check for clearan...

DSCF0061.JPG
342 hits | 72.42 KB | Posted: 10/29/10

DSCF0062.JPG
357 hits | 86.82 KB | Posted: 10/29/10

DSCF0063.JPG
365 hits | 71.85 KB | Posted: 10/29/10

DSCF0064.JPG
368 hits | 67.45 KB | Posted: 10/29/10

DSCF0065.JPG
340 hits | 73.22 KB | Posted: 11/6/10

DSCF0066.JPG
325 hits | 82.8 KB | Posted: 11/6/10

DSCF0067.JPG
337 hits | 79.74 KB | Posted: 11/6/10

DSCF0068.JPG
321 hits | 70.67 KB | Posted: 11/6/10

DSCF0069.JPG
342 hits | 71.11 KB | Posted: 11/6/10

DSCF0056.JPG
351 hits | 76.24 KB | Posted: 11/8/10

DSCF0057.JPG
359 hits | 76.79 KB | Posted: 11/8/10

DSCF0058.JPG
371 hits | 65.11 KB | Posted: 11/8/10

DSCF0059.JPG
408 hits | 67.17 KB | Posted: 11/8/10

DSCF0060.JPG
580 hits | 80.07 KB | Posted: 11/8/10

DSCF0073.JPG
493 hits | 63.94 KB | Posted: 10/28/10
Water pump was changed out so owner could run an alternator, I used a C9AE pump instead.

DSCF0074.JPG
422 hits | 59.31 KB | Posted: 10/28/10

DSCF0058.JPG
386 hits | 60.46 KB | Posted: 10/29/10

DSCF0057.JPG
357 hits | 65.86 KB | Posted: 10/29/10

DSCF0056.JPG
395 hits | 60.55 KB | Posted: 10/29/10

DSCF0056.JPG
415 hits | 54.09 KB | Posted: 11/10/10
The beginning of a 427 HiPo dual point fully centrifigal clone distributor.

DSCF0057.JPG
380 hits | 53.82 KB | Posted: 11/10/10

DSCF0060.JPG
585 hits | 45.12 KB | Posted: 11/10/10
All the guts removed & the vacuum advance mounting boss cut away. Slot will be filled with alum-poxy...

DSCF0061.JPG
520 hits | 51.77 KB | Posted: 11/10/10

DSCF0062.JPG
549 hits | 46.98 KB | Posted: 11/10/10

DSCF0061.JPG
562 hits | 54.56 KB | Posted: 11/15/10

DSCF0062.JPG
540 hits | 56.05 KB | Posted: 11/15/10

DSCF0064.JPG
537 hits | 56.95 KB | Posted: 11/15/10

DSCF0063.JPG
517 hits | 55.13 KB | Posted: 11/15/10

DSCF0053.JPG
794 hits | 63.77 KB | Posted: 9/16/10
Found a really nice set of C4AE-H heads from Dave Seversike in Seattle, WA. Will install SS 2.09&quo...

DSCF0052.JPG
608 hits | 71.32 KB | Posted: 9/16/10

DSCF0054.JPG
430 hits | 57.63 KB | Posted: 9/16/10

DSCF0055.JPG
455 hits | 70.43 KB | Posted: 9/16/10

DSCF0059.JPG
532 hits | 54.65 KB | Posted: 11/10/10

DSCF0058.JPG
389 hits | 53.32 KB | Posted: 11/10/10
A set of the roller rocker arms made in Australia (so they claim).
I've used several sets so far wi...

DSCF0037.JPG
595 hits | 49.88 KB | Posted: 6/14/10

DSCF0038.JPG
643 hits | 62.09 KB | Posted: 6/14/10

DSCF0039.JPG
574 hits | 60.93 KB | Posted: 6/14/10
These are the C3AE 427 factory exhaust headers that were sent to me, I have glass-beaded them. flat ...

DSCF0064.JPG
550 hits | 56.95 KB | Posted: 11/15/10