image.jpg
104 hits | 33.2 KB | Posted: 7/17/15
The Headliners out of earlier fsb's seem to be constructed out of a more ridgid cellular foam. The b...

image.jpg
90 hits | 45.36 KB | Posted: 7/17/15

image.jpg
93 hits | 39.95 KB | Posted: 7/17/15
Steel wire brush seemed to work the best.

image.jpg
97 hits | 26.19 KB | Posted: 7/17/15
Each of the corners were torn off at the visor mounts, but the breaks were clean.

image.jpg
89 hits | 35.61 KB | Posted: 7/17/15
Clean breaks..should be an easy fiberglass repair.

image.jpg
98 hits | 38.89 KB | Posted: 7/17/15

image.jpg
88 hits | 30.97 KB | Posted: 7/17/15

image.jpg
122 hits | 27.62 KB | Posted: 7/19/15
All brushed smooth, ready for repair.

image.jpg
138 hits | 45.06 KB | Posted: 7/19/15
Corner repair. You can see the original '92 headliner on the right. It's more of an oriented strand ...

image.jpg
70 hits | 35.48 KB | Posted: 7/19/15
Cleaning up.

image.jpg
123 hits | 41.66 KB | Posted: 7/19/15

image.jpg
99 hits | 44.37 KB | Posted: 7/19/15
Old school word workers call these type of patches 'Dutchmen'.

image.jpg
84 hits | 36.71 KB | Posted: 7/19/15
Made a bit of a sloped surface to cut against so I'm not manipulating the piece around.

image.jpg
124 hits | 31.33 KB | Posted: 7/19/15

image.jpg
92 hits | 36.17 KB | Posted: 7/19/15

image.jpg
121 hits | 33.18 KB | Posted: 7/19/15
Both sides patched.

image.jpg
81 hits | 42.07 KB | Posted: 7/19/15
Some fiberglass mat and a few coats of resin.

image.jpg
96 hits | 26.76 KB | Posted: 7/19/15
Another weak spot to deal with. Used some fiberglass mesh tape and resin to reinforce. I'll deal wit...

image.jpg
92 hits | 36.15 KB | Posted: 7/19/15

image.jpg
113 hits | 31.24 KB | Posted: 7/19/15