RAW_POWER > 1993 Ford F-350 > open folder Lift & Tires

Bottom is for front axle, top for the rear. Both are fo 6" of lift. I ordered F150 leaves for the re...
Leaves.JPG
479 hits | 54.93 KB | Posted: 2/26/06
Bottom is for front axle, top for the rear. Both are fo 6" of lift. I ordered F150 leaves for the re...
Cut the hanger rivets off with the plasma cutter. Worked well, but there was a little slag. Cleaned ...
IMG_2400.JPG
434 hits | 75.16 KB | Posted: 3/5/06
Cut the hanger rivets off with the plasma cutter. Worked well, but there was a little slag. Cleaned ...
Welded this side because I cant get behind it for bolts due to the front gas tank. Also, the fuel li...
IMG_2402.JPG
550 hits | 71.83 KB | Posted: 3/5/06
Welded this side because I cant get behind it for bolts due to the front gas tank. Also, the fuel li...
Shackle with no weight on it. I am using the stock shackles just to move the truck around while work...
shackle no weight.JPG
808 hits | 65.59 KB | Posted: 3/11/06
Shackle with no weight on it. I am using the stock shackles just to move the truck around while work...
This is the shackle with weight on it. Angle is about 35-40 degrees off of vertical axis. 45 is idea...
shackle compressed.JPG
680 hits | 62.27 KB | Posted: 3/11/06
This is the shackle with weight on it. Angle is about 35-40 degrees off of vertical axis. 45 is idea...
20x10 inch rims by Eagle Alloys. Stock 4.65 inch backspacing. Selling these on Craigslist.
Rims 002.jpg
994 hits | 61.65 KB | Posted: 3/21/06
20x10 inch rims by Eagle Alloys. Stock 4.65 inch backspacing. Selling these on Craigslist.
Front end under way.
Front End Lift 001.jpg
647 hits | 64.47 KB | Posted: 4/1/06
Front end under way.
These are the front plates for the front shackle reversal. They, along with the hangers, provide for...
front shackle plates.JPG
633 hits | 58.15 KB | Posted: 3/11/06
These are the front plates for the front shackle reversal. They, along with the hangers, provide for...
Front end shackle hangers. Provides for 6" of lift. I made it into a crossmember just for lateral su...
Front End Lift 002.jpg
641 hits | 48.72 KB | Posted: 4/2/06
Front end shackle hangers. Provides for 6" of lift. I made it into a crossmember just for lateral su...
Mounted Shacke Reversal. Looks fairly clean, IMO... I may add a tension support to help stabilize th...
Front End Lift.jpg
624 hits | 59.28 KB | Posted: 4/3/06
Mounted Shacke Reversal. Looks fairly clean, IMO... I may add a tension support to help stabilize th...
Shackless. About where it will sit once the shackles are on it, probably about 2-4" higher, plus t...
Puppies 003.jpg
684 hits | 58.65 KB | Posted: 4/5/06
Shackless.
About where it will sit once the shackles are on it, probably about 2-4" higher, plus t...
46" Michelin XML's. 46x16.5R20 Hard Compound, not many biting edges... poor man's 46's.
Tires 01.jpg
2708 hits | 81.33 KB | Posted: 4/29/06
46" Michelin XML's.
46x16.5R20
Hard Compound, not many biting edges... poor man's 46's.
Little over 7/8" tread...
Tires 02.jpg
766 hits | 43 KB | Posted: 4/29/06
Little over 7/8" tread...
Home fabbed shackles. Had a shop bend the steel, I did the rest. The shackle is 8.5" long, 6.25" eye...
Shackle.jpg
882 hits | 52.17 KB | Posted: 4/29/06
Home fabbed shackles. Had a shop bend the steel, I did the rest. The shackle is 8.5" long, 6.25" eye...
The truck as it stood before hacking the old axles off, far from completed, with 12" lift on 35's.
IMG_4222.JPG
965 hits | 104.03 KB | Posted: 1/17/07
The truck as it stood before hacking the old axles off, far from completed, with 12" lift on 35's.
Mounted on the M35 split rims. These will do for trail use until I can get something else worked out...
IMG_6469.JPG
526 hits | 86.46 KB | Posted: 7/31/07
Mounted on the M35 split rims. These will do for trail use until I can get something else worked out...