I wasn't entirely sure if my leaf spring perches were the same distance apart than what my truck used. Ever time I measured it seemed close but still off by about an inch. wasn't sure if I was just measuring bad, which is a big possibility, or if I could get away with it if it was off an inch. Decided to just get a new set of perches from Ruffstuff just in case.

I cut off the old perch on each side using a simple angle grinder. just have to be carefull and avoid cutting the axle tube. even if does it can be welded back up to patch. I just cut the parch the best I could then used a mini-sledge hammer to bust if the rest of the way off

Once busted off then grind down any remaining weld on the tube that can be in the way

Owner caption March 2015 · Photo 23 of 426