got the engine back in.

i replaced the old roller rockers with some Miller Mid-Lift 1.6 rockers. the previous rockers were knockoff Miller rockers from my 96 and 6 of 16 were damaged when i installed them. they still worked but defiantly not good to leave damaged parts in.

got the engine running. seems to be running good. oil pressure is 75psi cold and 50psi hot. hopefully the higher pressure and volume will let the crank and bearings last longer this time

i decided to change the injectors to 19lb and run a modified stock MAF sensor. the stock injectors will limit HP but it will now run more reliably than the 30lb injectors i used before. at some point i will upgrade to 24lb when i get the chance.

Owner caption October 2019 · Photo 202 of 285