![A wire was spliced to the MFS connector to supply key-switched power to the new USB power adapters. A [url=https://www.amazon.com/dp/B084S64LLR]2-port QC3.0 adapter[/url] replaced the cigar socket; another [url=https://www.amazon.com/dp/B07Y31XMBY]2-port QC3.0 adapter[/url] was cut into the console for the rear seat; both of those are always-on. The in-dash [url=https://www.amazon.com/dp/B07ZT1VZRY]4-port adapter board[/url] is on the key-switched circuit (for things like a [url=https://www.amazon.com/dp/B092ZXBSGV]phone cradle, Bluetooth FM modulator[/url], [url=https://www.amazon.com/dp/B07F6T3SSK]dash camera[/url], etc.) and is accessible by either pulling the cupholder tray, or by reaching in front of the console under the dash.
A [url=https://www.amazon.com/gp/product/B08DFF1W2W]wireless Qi transmitter[/url] will be added to the cupholder tray.
IF THE IMAGE IS TOO SMALL, click it.](https://www.supermotors.net/getfile/1167928/fullsize/usbpwr.jpg)
A wire was spliced to the MFS connector to supply key-switched power to the new USB power adapters. A 2-port QC3.0 adapter replaced the cigar socket; another 2-port QC3.0 adapter was cut into the console for the rear seat; both of those are always-on. The in-dash 4-port adapter board is on the key-switched circuit (for things like a phone cradle, Bluetooth FM modulator, dash camera, etc.) and is accessible by either pulling the cupholder tray, or by reaching in front of the console under the dash.
A wireless Qi transmitter will be added to the cupholder tray.
IF THE IMAGE IS TOO SMALL, click it.
Comments
More from this build
No comments yet.