What is the overall length of the bracket shown in this blueprint?

The overall bottom width is dimensioned as 9 13/16 inches.

What radius is the rounded end of the bracket?

The rounded left end is labeled R1", i.e., a 1-inch radius (making the arm 2 inches tall, as dimensioned).

How tall is the bracket overall?

The left side shows a 4" upper dimension plus a 2" lower arm, for a total height of 6 inches.

What are the top edge dimensions of the bracket?

Across the top, the drawing shows 5 1/4", then 1 1/16", then 2 1/2" for the angled top section.

Does the drawing specify material or thickness?

No. Only outline dimensions and the 1-inch end radius are given; no material, thickness, or part number appears.

Home/ Registry/ Dodge/ 1500/ 2001 Dodge 1500/ Photo supermotors.net/registry/media/722827

Custom Bracket Blueprint - Dimensioned Template Drawing (2001 Dodge 1500)

‹ ›

Engineering blueprint of a curved trim/bracket cross-section with dimensions including 9 13/16 in length and R1 in radius.

AI caption April 2009 · Photo 103 of 882

This document is a simple CAD-style dimensioned blueprint (apparently created in a program such as SketchUp) for a flat bracket or template part. The part is shown in profile as an L-shaped/boot-shaped piece with a fully rounded (semicircular) left end of 1-inch radius (labeled R1") and an angled upright arm on the right side. Overall dimensions given across the top are 5 1/4", 1 1/16", and 2 1/2" (spanning the top edge segments). Vertical dimensions on the left indicate the upper portion is 4" tall and the lower horizontal arm is 2" tall (total height 6"). Bottom dimensions show the lower arm's flat bottom edge is 7 3/8" long, with an additional 1 7/16" horizontal run under the angled right arm, and an overall bottom width of 9 13/16" measured from the leftmost point of the rounded end. A reader can use this drawing as a cutting template or fabrication guide to reproduce the bracket, since all outline dimensions and the end radius are specified. No material, thickness, part number, vehicle application, or date is stated anywhere on the drawing.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What is the overall length of the bracket shown in this blueprint?: The overall bottom width is dimensioned as 9 13/16 inches.
What radius is the rounded end of the bracket?: The rounded left end is labeled R1", i.e., a 1-inch radius (making the arm 2 inches tall, as dimensioned).
How tall is the bracket overall?: The left side shows a 4" upper dimension plus a 2" lower arm, for a total height of 6 inches.
What are the top edge dimensions of the bracket?: Across the top, the drawing shows 5 1/4", then 1 1/16", then 2 1/2" for the angled top section.
Does the drawing specify material or thickness?: No. Only outline dimensions and the 1-inch end radius are given; no material, thickness, or part number appears.