Look on the sheet metal directly in front of the 2 out of 3 bolts that are hidden behind. See them little indents in the metal? Take a drill to them, make it big enough to fit a 8 mil socket thru. You can see the two drilled holes pic with the green boxes. The green triangle is the third bolt, which you can actually see in the pic. It's right there, but you have to shave a bit off that edge in order to get a socket and extension in there. I used a round file and filed it down a bit.

Take motor out and remove the last phillips screw and the black cover. Remove the center piece - the cog that turns against the window regulator (the triangular circle on the right in the pic on the previous page). Clean out all of the little plastic pieces and throw a bit of new grease in there. Go to the local auto store and get the plastic bushings. I got them in the HELP section of the store...you know, all those red boxes with things you thought you'd never need.

Owner caption September 2009 · Photo 36 of 62